HAUPA - Main Catalogue Pagina 53
Commercieel klantenaanbod**Producten uit de cataloguspagina
excl. verzending
excl. verzending
excl. verzending
excl. verzending
excl. verzending
excl. verzending
excl. verzending
excl. verzending
excl. verzending
excl. verzending
excl. verzending
excl. verzending
excl. verzending
excl. verzending
excl. verzending
excl. verzending
Platzhalter Crimping pliers for uninsulated Platzhalter brass cable lugs INFO Crimping pliers Crimping pliers for uninsulated open brass cable lugs for open brass cable lugs, short construction, 20% angled handy form, with locking device, with adjustable crimp pressure, roll pressing We distinguish between wire crimps and insulation crimps. The end of the wire should be flush with the wire crimp or extend beyond it no further than 1 mm, so that the plug function is not affected. The insulation end must not project into the wire crimp, however it must also not lie just half beneath the insulation crimp. Only in this way can a standard-compliant crimp be ensured. In a good crimp the wire must be deformed. In this case one talks of a gastight crimp. Art. no. 210777 mm² 0.5 - 1,5 kg 0,366 PU 1 Crimping pliers for open brass cable lugs, with locking device, with adjustable crimp pressure, chrome plated, roll pressing Wrong: The end of the insulation is in the insulation crimp. Wrong: The stripped wire projects into the contact zone. Art. no. 211682 210762 ✸ Correct: The end of the insulation and the stripped wire are crimped accurately. To facilitate accurate crimping a positioning aid is available for crimping pliers. Socket sleeves (female) with cable stop Socket sleeves (female) with cable stop and side cable connection bare brass Precision-ground crimp pro昀椀 les => clean crimp bare brass mm² 0.5 - 2,5 0.5 - 6 kg 0,568 0,575 PU 1 1 Crimping pliers for open brass cable lugs, with locking device, with adjustable crimp pressure, chrome plated, roll pressing Flat terminals tin-plated brass Art. no. 210785 210786 mm² 0.5 - 1 1.5 - 2,5 kg 0,537 0,535 PU 1 1 HUPcompact HC04 for open brass tab connectors, 100% parallel crimp, precision crimp, handle force: 5 kN, small compact construction, life span: 50,000 crimp cycles, with locator, roll pressing PREMIU M Adjustable crimping pressure => Wear compensation via adjusting screw Forced block, unblockable => guaranteed DIN-compliant crimped connection Art. no. 213094 mm² 0,5 - 6 198 kg 0,490 PU 1 Ergonomically formed plastic handles => low fatigue work ... convincing solutions HAUPA GmbH, Lange Str. 40, D-42857 Remscheid, Germany, Phone: +49 (0)2191 8418-0, Fax: +49 (0)2191 8418-840, E-mail: [email protected] 53
623 Pagina’s | Geldig tot 08/2026 | Vorige pagina | Volgende pagina
Kies uw taal
Juridische kwesties
De fabrikant is exclusief verantwoordelijk voor de inhoud, prijs en artikeldetails van de producten en aanbiedingen in de catalogi. Technische en optische wijzigingen door de fabrikant en fouten voorbehouden.
Aanvraagformulier voor speciale producten
De ToolTeam® Inkoopservice
Bent u op zoek naar producten die wel in de catalogus staan maar niet direct online te koop zijn?Onze aankoopdienst zal u graag een niet-bindend en individueel aanbod doen.