HAAS - CATALOG 7.5 Pagina 207
Commercieel klantenaanbod**Beste verkopers van Otto Haas
excl. verzending
excl. verzending
excl. verzending
excl. verzending
excl. verzending
excl. verzending
excl. verzending
excl. verzending
excl. verzending
excl. verzending
excl. verzending
excl. verzending
excl. verzending
excl. verzending
excl. verzending
excl. verzending
excl. verzending
excl. verzending
excl. verzending
excl. verzending
excl. verzending
excl. verzending
excl. verzending
excl. verzending
excl. verzending
excl. verzending
excl. verzending
excl. verzending
excl. verzending
excl. verzending
excl. verzending
excl. verzending
excl. verzending
excl. verzending
excl. verzending
excl. verzending
excl. verzending
excl. verzending
excl. verzending
excl. verzending
DID YOU KNOW... ... the abbreviations "DN" and "PN" that are commonly used in our seal delivery program and their meaning? "PN" is the abbreviation for "Pressure Nominal" and is the nominal pressure for a pipeline system. The respective pressure specification in bar is understood to be at a room temperature of 20° C. PN 10 e.g. is a pipeline with the maximum permissible pressure of 10 bar at a medium temperature of 20° C. At higher or lower temperatures of the flow medium, the permissible pressure is correspondingly lower. The abbreviation "DN", also called "nominal width", defines the inner diameter of a pipe or hose line or a armature in connection with the pipe or hose line used. They will quickly find, we have largely revised our soft-plastic flat-sealing program. According to the application areas "drinking water supply" and seals for "gas supply", we summarized our products completly new sorted and in differents underchapters. The materials used for the manufacture of the "flat gaskets" are tested and approved "W 270". In chapter 17, you will find technical information on the materials according to DVGW. Should you have special applications to fulfill, we ask for your request, specifying the respective conditions of use. Illustrations, dimensions and descriptions are not binding. We reserve the right to make technical changes!
373 Pagina’s | Geldig tot 12/2024 | Vorige pagina | Volgende pagina
Kies uw taal
Juridische kwesties
De fabrikant is exclusief verantwoordelijk voor de inhoud, prijs en artikeldetails van de producten en aanbiedingen in de catalogi. Technische en optische wijzigingen door de fabrikant en fouten voorbehouden.
Aanvraagformulier voor speciale producten
De ToolTeam® Inkoopservice
Bent u op zoek naar producten die wel in de catalogus staan maar niet direct online te koop zijn?Onze aankoopdienst zal u graag een niet-bindend en individueel aanbod doen.
