GEDORE Main catalogue Pagina 259
Commercieel klantenaanbod**Producten uit de cataloguspagina
excl. verzending
excl. verzending
excl. verzending
excl. verzending
excl. verzending
excl. verzending
excl. verzending
excl. verzending
Pliers SAFE CUT i WIRE ROPE CUTTER • Shearing cut - the cutting plates slide past each other and in this way dissect the material. • The wire rope is cleanly cut and retains its circular crosssection. It does not fan out. BOLT CUTTER • Notch cut; the cutters press into the material and create a notch. The material is compacted and thus separated. • The wire rope is compressed and thus loses its circular crosssection at the cut. The wire rope fans out as a result. SPLICING FANNING OUT The old seafaring ability to separate the rope into its individual strands so as to then braid them into a loop or lengthen the rope with another rope without knotting. Fanning out - that is separating off into individual strands - is not wanted when cutting wire ropes. It is a very laborious business to splice wire ropes. That is why more up-to-date ways are available to incorporate loops in wire ropes. However, they require a smooth cut without any spliced strands. 8317 Bowden cable cutter/Wire rope cutter › Crimping of Bowden cable sheaths and end sheaths › 1.5 mm and 2 mm For cutting wire rope up to Ø 2 mm and bowden-cable sleeves up to Ø 5 mm as well as for medium-hard wire › With opening spring, transport lock and width adjustment Code No. y 0 2011638 8317-160 JC 160 0,15 Pliers JC 8320 › Easy-to-change cutting plates › Extremely soft shearing cut reliably prevents Wire rope cutters › › › › the wire rope from fanning out Specially arched cutting edges Hardness 62 - 65 HRC 2 integrated press profiles for Bowden cable end caps and Bowden cable sheath end caps Wire ropes up to 1800 N/mm² with max. 6 mm Ø (e.g. stainless steel wire ropes, wire ropes with steel and textile cables, Bowden cables, shrouds) › Wire up to 750 N/mm² with max. 4 mm Ø (e.g. nails/wire pins, screws, bolts, ceiling hangers) › Single and multicore copper and aluminium cables with max. 10 mm Ø › Adjustable joint for precise cutting plate guidance › Latch to prevent unwanted opening Code No. y 0 2788799 8320-200 JC 200 0,480 Pliers E-8320 Set of spares for wire rope cutter › Consisting of: 2 inserts, 2 screws, 1 TX angle wrench Code No. 0 2830779 E-8320-200 0,020 259
460 Pagina’s | Geldig tot 12/2024 | Vorige pagina | Volgende pagina
Juridische kwesties
De fabrikant is exclusief verantwoordelijk voor de inhoud, prijs en artikeldetails van de producten en aanbiedingen in de catalogi. Technische en optische wijzigingen door de fabrikant en fouten voorbehouden.
Aanvraagformulier voor speciale producten
De ToolTeam® Inkoopservice
Bent u op zoek naar producten die wel in de catalogus staan maar niet direct online te koop zijn?Onze aankoopdienst zal u graag een niet-bindend en individueel aanbod doen.