GEDORE Automotive KLANN Main catalog General Repairs Pagina 91
Commercieel klantenaanbod**Producten uit de cataloguspagina
excl. verzending
excl. verzending
excl. verzending
excl. verzending
excl. verzending
excl. verzending
excl. verzending
excl. verzending
excl. verzending
excl. verzending
Wheel Bearings KL-0040-2500 Hydraulic Cylinder (17t) KL-0040-2500 Thanks to its special design as a hollow piston cylinder, the KL-0040-2500 hydraulic cylinder (17t) can be used to perform pulling as well as pushing operations in conjunction with the corresponding spindles available as accessories. Range of Use: In conjunction with various GEDORE Automotive tools, the hydraulic-cylinder (17t) KL-0040-2500 can be used for the removal and installation of drive shafts, wheel hubs, wheel bearings, silentblocs and suspension ball joints. Note: A hydraulic pump is needed to drive the hydraulic cylinder KL-0040-2500. For accessories such as coupling, hydraulic pump, pressure gauge etc., please refer to chapter 4 in this Catalogue. Technical Data: Maximum admissible force: Maximum stroke: Maximum oil pressure: Maximum volume of oil: Piston area: Thread in hollow piston: Retaining thread (pushing side): Retaining thread (pulling side): Cylinder external diameter: Cylinder overall length (piston retracted): Cylinder overall length (piston extended): Hydraulic fluid connection thread: Weight: 170kN (17t) 45mm 700bar 122cm³ 27cm² M20 2¼“-14 UNS M42x2 80mm 202mm 247mm 3/8“ NPT 5.2kg 3 KL-0040-2500 K Hydraulic Cylinder (17 t), in a Plastic Storage Case Like the KL-0040-2500, but supplied in a Plastic Storage Case. KL-0039-1003 Retaining Adaptor with O-Rings, for Hydraulic Cylinder KL-0039-1003 This adaptor is needed to retain the various KL-0039-.. and KL-0043-.. pressure/ support sleeves if these are to be used with the hydraulic cylinder KL-0040-2500. (Connection thread: M42x2) KL-0039-1005 Adaptor, Ø 35mm KL-0039-1005 The KL-0039-1005 adaptor upgrades the KL-0040-2500 GEDORE Automotive hydraulic cylinder (17t) by making it suitable also for use on the tools of the wheel bearing/silentbloc tool series having an internal retaining Ø of 35mm. For this, the KL-0039-1003 retaining adaptor is also necessary. Technical Data: External Ø: Internal Ø: Height: 35mm 20.5mm 16mm KL-0039-1002 Retaining Adaptor with O-Rings, for Clamping Nut and Pressure Spindle KL-0039-1002 This adaptor is necessary for retaining the various pressure/support sleeves of the KL-0039-.. and KL-0043-.. Series. Retaining Ø for clamping nut or pressure spindle: 20mm Copyright GEDORE Automotive GmbH, Germany formerly (91) 3.1-12
580 Pagina’s | Geldig tot 12/2025 | Vorige pagina | Volgende pagina
Juridische kwesties
De fabrikant is exclusief verantwoordelijk voor de inhoud, prijs en artikeldetails van de producten en aanbiedingen in de catalogi. Technische en optische wijzigingen door de fabrikant en fouten voorbehouden.
Aanvraagformulier voor speciale producten
De ToolTeam® Inkoopservice
Bent u op zoek naar producten die wel in de catalogus staan maar niet direct online te koop zijn?Onze aankoopdienst zal u graag een niet-bindend en individueel aanbod doen.