GEDORE Automotive KLANN Main catalog General Repairs Pagina 277
Commercieel klantenaanbod**Producten uit de cataloguspagina
excl. verzending
excl. verzending
excl. verzending
excl. verzending
excl. verzending
excl. verzending
excl. verzending
excl. verzending
excl. verzending
excl. verzending
excl. verzending
excl. verzending
Injection System, PSA KL-1383-142 K Injector Nozzle Puller Set, PSA 1.4 8V HDI KL-1383-142 K Applicable to Peugeot and Citroën 1.4 8V (DV4 - Euro 4 and Euro 5) Diesel engines; as installed in Citroën C1, C2, C3, DS3, Xsara, and Peugeot 107, 206, 207, 307 1007 etc. (Engine codes: DV4C, DV4TD, DV4TED, 8HR, 8HT, 8HX, 8HZ) An indispensable tool set for the professional removal of very tight-fitting/seized injector nozzles without the need for removing the cylinder head from the vehicle. The KL-1383-142 K injector nozzle puller set allows for the accurate extraction of very tight-fitting or stuck injector nozzles. The removal of the cylinder head is not necessary. The special pull spindle with union nut is specifically designed for use on the above mentioned vehicles to ensure safe and accurate support of the puller tools, even if injectors are very tight-fitting or seized in place. The use of the special pull spindle with additional union nut will facilitate the extraction of even the most stubborn injectors. The injector nozzle needs to be opened for this. Procedure for Injector Nozzle Removal: Unscrew injector nozzle head by means of the special socket included in the set. Screw pull spindle into injector nozzle, and, if using the pull spindle with union nut, additionally screw union nut onto the injector nozzle. Place pre-assembled base tool onto cylinder head and screw on shoulder nut. Extract injector nozzle by evenly rotating shoulder nut. Note: Be sure to read and observe the injector nozzle manufacturer’s directions and specifications before re-installing an injector nozzle that had been opened. If necessary, have the injector nozzle tested and checked by an authorized workshop. Scope of Delivery: KL-1383-142 K Injector Nozzle Puller Set, PSA 1.4 8V HDI Part No. KL-1383-1400 KL-0369-4606 A KL-1383-1112 KL-0369-4505 A KL-0369-461 A KL-0126-221 KL-0014-0030 KL-1383-1490 Description Base Tool Pull Spindle, M17x1, 132mm long, with Union Nut Shoulder Nut, M16x1.5 Special Bit Insert, (waf) 10mm Special Socket, (waf) 29mm, 1/2" Drive Flexible Magnetic Lifter Molybdenum Disulphide Paste Plastic Storage Case with Insert Qty 1 1 1 1 1 1 1 1 KL-1383-143 K Injector Nozzle Puller Set, PSA 1.6 8V HDI KL-1383-143 K 6 Applicable to Peugeot and Citroën 1.6 8V (DV6 - Euro 5) Diesel engines; as installed in Citroën C3, C4, C5, DS3, DS4, Berlingo, and Peugeot 207, 308, 508, 3008, 5008, Partner etc. (Engine codes: DV6C, DV6CTED, DV6DTED, 9HF, 9HL, 9HP, 9HR) An indispensable tool set for the professional removal of very tight-fitting/seized injector nozzles without the need for removing the cylinder head from the vehicle. The KL-1383-143 K injector nozzle puller set allows for the accurate extraction of very tight-fitting or stuck injector nozzles. The removal of the cylinder head is not necessary. The special pull spindle with union nut is specifically designed for use on the above mentioned vehicles to ensure safe and accurate support of the puller tools, even if injectors are very tight-fitting or seized in place. The use of the special pull spindle with additional union nut will facilitate the extraction of even the most stubborn injectors. The injector nozzle needs to be opened for this. Procedure for Injector Nozzle Removal: Unscrew injector nozzle head by means of the special socket included in the set. Screw pull spindle into injector nozzle, and, if using the pull spindle with union nut, additionally screw union nut onto the injector nozzle. Place pre-assembled base tool onto cylinder head and screw on shoulder nut. Extract injector nozzle by evenly rotating shoulder nut. Note: Be sure to read and observe the injector nozzle manufacturer’s directions and specifications before re-installing an injector nozzle that had been opened. If necessary, have the injector nozzle tested and checked by an authorized workshop. Scope of Delivery: KL-1383-143 K Injector Nozzle Puller Set, PSA 1.6 8V HDI Part No. KL-1383-1400 KL-1383-1021 KL-0369-4606 A KL-1383-1112 KL-0369-4505 A KL-0369-461 A KL-1383-1022 KL-0126-221 KL-0014-0030 KL-1383-1490 Description Base Tool Pull Spindle, M25x1, 132mm long Pull Spindle, M17x1, 132mm long, with Union Nut Shoulder Nut, M16x1.5 Special Bit Insert, (waf) 10mm Special Socket, (waf) 29mm, 1/2" Drive Special Socket, (waf) 25mm, 1/2" Drive Flexible Magnetic Lifter Molybdenum Disulphide Paste Plastic Storage Case with Insert Copyright GEDORE Automotive GmbH, Germany Qty 1 1 1 1 1 1 1 1 1 1 formerly (277) 6.4-32
580 Pagina’s | Geldig tot 12/2025 | Vorige pagina | Volgende pagina
Juridische kwesties
De fabrikant is exclusief verantwoordelijk voor de inhoud, prijs en artikeldetails van de producten en aanbiedingen in de catalogi. Technische en optische wijzigingen door de fabrikant en fouten voorbehouden.
Aanvraagformulier voor speciale producten
De ToolTeam® Inkoopservice
Bent u op zoek naar producten die wel in de catalogus staan maar niet direct online te koop zijn?Onze aankoopdienst zal u graag een niet-bindend en individueel aanbod doen.