GEDORE Automotive KLANN Silentblocs and Bushings Pagina 25
Commercieel klantenaanbod**Producten uit de cataloguspagina
excl. verzending
excl. verzending
excl. verzending
excl. verzending
excl. verzending
excl. verzending
excl. verzending
excl. verzending
KL-0174-569 Adaptor, 1 1/2"-16 UN to 2 1/4"-14 UNS This adaptor is required to use the Hydraulic Cylinder KL-0040-2500 as a drive for tool sets having a 1½"-16 UN retaining thread. KL-0174-569 Retaining thread for tool set Retaining thread for hydraulic cylinder Technical Data: External thread: Internal thread: 1½"-16 UN 2¼"-14 UNS Note: The external thread 1½"-16 UN, measured on the tool set, has an internal Ø of 36.6mm. The internal thread 2¼"-14 UNS measured on the Hydraulic Cylinder to be screwed in, has an external Ø of 56.95mm. KL-0174-571 Adaptor, M40x2 to 2 1/4"-14 UNS This adaptor is required to use the Hydraulic Cylinder KL-0040-2500 as a drive for tool sets having an M40x2 retaining thread. Technical Data: External thread: Internal thread: KL-0174-571 Retaining thread for tool set Retaining thread for hydraulic cylinder M40x2 2¼"-14 UNS Note: The external thread M40x2, measured on the tool set, has an internal Ø of 38mm. The internal thread 2¼"-14 UNS measured on the hydraulic cylinder to be screwed in, has an external Ø of 56.95mm. KL-0174-853 Thrust Piece for Mechanical Spindle, KL-0174-853 with O-Rings The tool is needed when spindle KL-0174-620 or KL-0174-817 and adaptor KL-0174-547 are used as a mechanical drive for the GEDORE Automotive pressing devices. KL-0045-7021 Adaptor (Pin Ø 20mm) KL-0045-7021 This tool is required when the various pressure/support sleeves of the KL-0039-.. Series are to be used in conjunction with the hydraulic spindle KL-0045-70. KL-0039-1935 Thrust Piece KL-0039-1935 This tool is necessary for pressing out drive shafts. It is used in conjunction with the KL-0174-.. Puller Series, the KL-0040-2500 hydraulic cylinder and the KL-0039-1930 pressure spindle with pin Ø 20mm. Copyright GEDORE Automotive GmbH, Germany formerly (161) 4-25 4
58 Pagina’s | Geldig tot 12/2025 | Vorige pagina | Volgende pagina
Kies uw taal
Juridische kwesties
De fabrikant is exclusief verantwoordelijk voor de inhoud, prijs en artikeldetails van de producten en aanbiedingen in de catalogi. Technische en optische wijzigingen door de fabrikant en fouten voorbehouden.
Aanvraagformulier voor speciale producten
De ToolTeam® Inkoopservice
Bent u op zoek naar producten die wel in de catalogus staan maar niet direct online te koop zijn?Onze aankoopdienst zal u graag een niet-bindend en individueel aanbod doen.
