GEDORE Automotive KLANN Silentblocs and Bushings Pagina 23
Commercieel klantenaanbod**Producten uit de cataloguspagina
excl. verzending
excl. verzending
excl. verzending
excl. verzending
excl. verzending
excl. verzending
excl. verzending
excl. verzending
excl. verzending
excl. verzending
excl. verzending
excl. verzending
KL-0174-556 Adaptor, 2 1/4"-14 UNS to M68x2 Required to use a hydraulic cylinder having an M68x2 retaining thread as a drive for the GEDORE Automotive Hydraulic Tool Sets. Technical Data: External thread: Internal thread: KL-0174-556 Retaining thread for tool set Retaining thread for hydraulic cylinder 2¼“-14 UNS M68x2 Note: The external thread 2 1/4“-14 UNS, measured on the tool set, has an internal Ø of 55.15mm. The internal thread M60x2 measured on the hydraulic cylinder to be screwed in, has an external Ø of 68mm. KL-0174-558 Adaptor, 2 1/4"-14 UNS to M55x2 Compatible with the Gedore wheel hub puller for HGV 1.62. This adaptor is needed to use the 17t hydraulic cylinder KL-0040-2500 in conjunction with pressure spindle KL-0039-1930 and pressure piece KL-0039-1935 as a drive for the Gedore wheel hub puller for HGV 1.62 (Code 8026030). Even severely stuck/seized wheel hubs are no longer an issue using the KL-0040-2500 17t hydraulic cylinder. KL-0174-558 Retaining thread for tool set Retaining thread for hydraulic cylinder 4 KL-0174-559 Adaptor, 2 1/4"-14 UNS to 2 1/4"-14 UNS This adaptor is needed to operate the hydraulic cylinder KL-0040-2500 when the perforated puller plates (size 2 and size 3) having a pitch circle diameter of 90-102mm from the KL-0174-.. Series are to be used. KL-0174-559 Retaining thread for tool set Retaining thread for hydraulic cylinder Technical Data: External thread: Internal thread: 2¼“-14 UNS 2¼“-14 UNS Note: Other dimensions available upon request. KL-0174-561 Adaptor, 2 1/4"-16 UN to 2 1/4"-14 UNS This tool is necessary if the hydraulic cylinder KL-0040-2500 is to be used as a drive for a tool set having a 2¼"-16 UN retaining thread. Technical Data: External thread: Internal thread: KL-0174-561 Retaining thread for tool set Retaining thread for hydraulic cylinder 2¼"-16 UN 2¼"-14 UNS Note: The external thread 2¼"-16 UN measured on the tool set, features an internal Ø of 55.15mm. The internal thread 2¼"-14 UNS measured on the hydraulic cylinder to be screwed in, features an external Ø of 56.95mm. KL-0174-562 Adaptor, 2 3/4"-16 UN to 2 1/4"-14 UNS KL-0174-562 This tool is required if the 17t hydraulic cylinder KL-0040-2500 or the 10t hydraulic cylinder KL-0040-2200 are to be used as a drive for press frame KL-1000-01 . External Thread: Internal Thread: Retaining thread for tool set Retaining thread for hydraulic cylinder Technical Data: 2¾"-16 UN 2¼"-14 UNS Note: The external thread 2¾"-16 UN measured on the tool set, has an internal Ø of 68.25mm. The internal thread 2¼"-14 UNS measured on the hydraulic cylinder to be screwed in, features an external Ø of 56.95mm. Copyright GEDORE Automotive GmbH, Germany formerly (159) 4-23
58 Pagina’s | Geldig tot 12/2025 | Vorige pagina | Volgende pagina
Juridische kwesties
De fabrikant is exclusief verantwoordelijk voor de inhoud, prijs en artikeldetails van de producten en aanbiedingen in de catalogi. Technische en optische wijzigingen door de fabrikant en fouten voorbehouden.
Aanvraagformulier voor speciale producten
De ToolTeam® Inkoopservice
Bent u op zoek naar producten die wel in de catalogus staan maar niet direct online te koop zijn?Onze aankoopdienst zal u graag een niet-bindend en individueel aanbod doen.