GEDORE Automotive KLANN Car Specialty Tools Catalogue Pagina 49
Commercieel klantenaanbod**Producten uit de cataloguspagina
excl. verzending
excl. verzending
excl. verzending
excl. verzending
excl. verzending
excl. verzending
excl. verzending
excl. verzending
excl. verzending
excl. verzending
excl. verzending
excl. verzending
excl. verzending
excl. verzending
excl. verzending
excl. verzending
excl. verzending
excl. verzending
excl. verzending
excl. verzending
excl. verzending
excl. verzending
excl. verzending
excl. verzending
excl. verzending
excl. verzending
excl. verzending
excl. verzending
excl. verzending
excl. verzending
excl. verzending
excl. verzending
excl. verzending
excl. verzending
excl. verzending
excl. verzending
excl. verzending
excl. verzending
excl. verzending
excl. verzending
excl. verzending
excl. verzending
excl. verzending
excl. verzending
excl. verzending
2.3 Wheel Bearings, Wheel Hubs and Drive Shaft (Code 2354578) KL-0039-1413 Centring Ring, Ø 70mm KL-0039-1413 For supporting/centring the housing of the wheel bearing tool on the wheel bearing housing (knuckle). (Code 2354683) KL-0039-1414 Centring Ring, Ø 75mm KL-0039-1414 For supporting/centring the housing of the wheel bearing tool on the wheel bearing housing (knuckle). (Code 2354802) KL-0039-1415 Centring Ring, Ø 80mm KL-0039-1415 For supporting/centring the housing of the wheel bearing tool on the wheel bearing housing (knuckle). KL-0039-807 B Support Ring Set (Code 3291154) KL-0039-807 B 6 pcs. Fits universally for cars and vans. When removing and installing wheel bearings, there is usually the problem of a very small bearing surface or an uneven bearing surface on the rear of the wheel bearing housing. A support is therefore not possible by the standard housings and centring rings of the KL-0039-..Series. The special support ring kit enables a safe support of wheel bearing housings with a very small contact surface or uneven contact surfaces, for example due to the ABS sensor. Unevenness on the contact surface on the wheel bearing housing can be easily bridged by means of the special recesses on the support rings. Consisting of: KL-0039-1402 Housing: Outside-Ø: 104mm Inside-Ø: 84mm / 90mm Height: 85mm KL-0039-1505 Support Ring, Cylindrical: Outside-Ø 104mm Inside-Ø: 84mm Height: 53mm KL-0039-1503 Support Ring, Conical Outside-Ø: 99mm Inside-Ø: 74mm Height: 39mm KL-0039-1506 Centring Ring: Outside-Ø 60mm Inside-Ø: 20.5mm Height: 20mm KL-0039-1504 Support Ring, Conical: Outside-Ø: 99mm Inside-Ø: 74mm Height: 44mm KL-0039-1509 Support Ring, Cylindrical: Outside-Ø 104mm Inside-Ø: 85mm Height: 45mm (Code 1811207) KL-0192-5 Circlip Pliers, Ø 40-100mm KL-0192-5 Due to the 45° angled tips, this tool is ideal for inside circlips. Required for gearbox and wheel bearing repairs. Technical Data: Tip Ø: Length: Weight: Copyright GEDORE Automotive GmbH, Germany 2.5mm 220mm 220g 49
220 Pagina’s | Geldig tot 12/2025 | Vorige pagina | Volgende pagina
Kies uw taal
Juridische kwesties
De fabrikant is exclusief verantwoordelijk voor de inhoud, prijs en artikeldetails van de producten en aanbiedingen in de catalogi. Technische en optische wijzigingen door de fabrikant en fouten voorbehouden.
Aanvraagformulier voor speciale producten
De ToolTeam® Inkoopservice
Bent u op zoek naar producten die wel in de catalogus staan maar niet direct online te koop zijn?Onze aankoopdienst zal u graag een niet-bindend en individueel aanbod doen.
