Ganter Norm Standard Parts - Catalogue Pagina 1614
Commercieel klantenaanbod**Beste verkopers van Ganter Norm
excl. verzending
excl. verzending
excl. verzending
excl. verzending
excl. verzending
excl. verzending
excl. verzending
excl. verzending
excl. verzending
excl. verzending
excl. verzending
excl. verzending
excl. verzending
excl. verzending
excl. verzending
excl. verzending
excl. verzending
excl. verzending
excl. verzending
excl. verzending
excl. verzending
excl. verzending
excl. verzending
excl. verzending
excl. verzending
excl. verzending
excl. verzending
excl. verzending
excl. verzending
excl. verzending
excl. verzending
excl. verzending
excl. verzending
excl. verzending
excl. verzending
excl. verzending
excl. verzending
excl. verzending
excl. verzending
excl. verzending
If agitated, there is the risk that oil will leak. With properly aligned and shaped splash guards (see schematic drawing), these breather caps prevent the oil from leaking without substantially disrupting the ventilation / breathing process (pressure compensation) The splash guards can be left out if their function is no longer needed or if a maximum air flow rate is desired. 3.2 3.9 3.8 3.7 3.6 3.5 A filter is used to protect the oil from outside pollution (dust). The filter is made of PU foam with a filtration of 40 μm. The filter in these breather caps has a large volume for longer service life, i.e. it does not clog up too quickly. 3.3 Breather caps GN 663 are normally used in larger oil reservoirs which must be ventilated and whose level changes rapidly. The latter requires a high air flow rate during breathing / ventilating (Breather caps GN 552 Page 1608 are usually sufficient for smaller containers and gears). 3.4 Description of function 3.1 GN 663 Breather Caps continued Air flow rate [l/min] in reliance on the pressure difference Δp [mbar] container / outside space with filter (40 μm): without filter: Type without splash guards (Identification no. 3 and 4) Air flow rate [l/min] in reliance on the pressure difference Δp [mbar] container / outside space with filter (40 μm): without filter: Type with splash guards (Identification no. 1 and 2) 3.5 Controlling, Venting, Sealing of Liquids and Gases | Page 1613
2210 Pagina’s | Geldig tot 12/2026 | Vorige pagina | Volgende pagina
Kies uw taal
Juridische kwesties
De fabrikant is exclusief verantwoordelijk voor de inhoud, prijs en artikeldetails van de producten en aanbiedingen in de catalogi. Technische en optische wijzigingen door de fabrikant en fouten voorbehouden.
Aanvraagformulier voor speciale producten
De ToolTeam® Inkoopservice
Bent u op zoek naar producten die wel in de catalogus staan maar niet direct online te koop zijn?Onze aankoopdienst zal u graag een niet-bindend en individueel aanbod doen.
