Ganter Norm Standard Parts - Catalogue Pagina 1610
Commercieel klantenaanbod**Beste verkopers van Ganter Norm
excl. verzending
excl. verzending
excl. verzending
excl. verzending
excl. verzending
excl. verzending
excl. verzending
excl. verzending
excl. verzending
excl. verzending
excl. verzending
excl. verzending
excl. verzending
excl. verzending
excl. verzending
excl. verzending
excl. verzending
excl. verzending
excl. verzending
excl. verzending
excl. verzending
excl. verzending
excl. verzending
excl. verzending
excl. verzending
excl. verzending
excl. verzending
excl. verzending
excl. verzending
excl. verzending
excl. verzending
excl. verzending
excl. verzending
excl. verzending
excl. verzending
excl. verzending
excl. verzending
excl. verzending
excl. verzending
excl. verzending
Description of function 3.1 GN 552 Breather Caps continued The splash guards can be left out if their function is no longer needed or if a higher air flow rate is desired (Identification no. 3 and 4). 3.3 If the oil is agitated, e.g. by a gear running in an oil bath or sump, there is the risk that the oil will leak. With properly aligned and shaped splash guards (see schematic drawing), these breather caps prevent the oil from leaking without substantially disrupting the ventilation / breathing process (pressure compensation). 3.2 Breather caps GN 552 are used in oil reservoirs which must be ventilated. 3.9 3.8 3.7 3.6 3.5 For a very high air flow rate (the level of the oil reservoir changing quickly), breather caps GN 663 Page 1612 should be used. 3.4 A filter is used to protect the oil from outside pollution (dust). The filter is mounted behind the splash guards to ensure it makes no contact with the oil and becomes saturated by capillary effect. Air flow rate [l/min] in reliance on the pressure difference Δp [mbar] container / outside space with filter (40 μm): without filter: Type without splash guards (Identification no. 3 and 4) Air flow rate [l/min] in reliance on the pressure difference Δp [mbar] container / outside space with filter (40 μm): without filter: Type with splash guards (Identification no. 0, 1 and 2) 3.5 Controlling, Venting, Sealing of Liquids and Gases | Page 1609
2210 Pagina’s | Geldig tot 12/2026 | Vorige pagina | Volgende pagina
Kies uw taal
Juridische kwesties
De fabrikant is exclusief verantwoordelijk voor de inhoud, prijs en artikeldetails van de producten en aanbiedingen in de catalogi. Technische en optische wijzigingen door de fabrikant en fouten voorbehouden.
Aanvraagformulier voor speciale producten
De ToolTeam® Inkoopservice
Bent u op zoek naar producten die wel in de catalogus staan maar niet direct online te koop zijn?Onze aankoopdienst zal u graag een niet-bindend en individueel aanbod doen.
