GAH ALBERTS - Hardware Profile and Sheets Pagina 190
Commercieel klantenaanbod**Producten uit de cataloguspagina
excl. verzending
excl. verzending
excl. verzending
excl. verzending
excl. verzending
excl. verzending
excl. verzending
excl. verzending
excl. verzending
excl. verzending
Stop for sash lock boxes with countersunk screw holes suitable for electric door opener nos. 413842 and 413859. suitable for all lock cases with a depth of 40 mm applicable DIN left and right prepared for electrical door openers Accessory note: Dimension a Electric door opener not included. Dimension b Dimension c Dimension d UNIT PU 1 Piece Contents Delivper PU ery time Order no. 4004338... Material: raw steel, Surface: galvanised, thick-film passivated, for screwing on 235.5 mm 196 mm 43 mm 20 mm - L 412302 Stop for sash lock boxes with countersunk screw holes suitable for all lock cases with a depth of 30 - 40 mm suitable for round and rectangular tubes, second gate leaves and wall columns applicable DIN left and right with rubber buffers for quiet closing Set components: Dimension a One set consists of one lower section, one stop bracket and two raised countersunk head screws, with suitable plugs Dimension b Dimension c Dimension d UNIT PU Contents Delivper PU ery time Order no. 4004338... Material: raw steel, Surface: galvanised 188 mm 162 mm 30 mm 20 mm 1 Bag - L 412081 188 mm 162 mm 40 mm 20 mm 1 Bag - L 412104 Stop for sash lock boxes with countersunk screw holes suitable for all lock cases with a depth of 30 - 40 mm Assembly note: The stop can be either screwed on or embedded in concrete; if concrete is used, the masonry anchors must first be screwed into the welded nuts. Accessory note: Wall anchors, screws, and plugs packed in a bag included. Dimension a Dimension b Dimension c Dimension d UNIT PU Contents Delivper PU ery time Order no. 4004338... Material: raw steel, Surface: hot-dip galvanised 172 mm 146 mm 30 mm 25 mm 1 Bag - L 412319 172 mm 146 mm 34 mm 25 mm 1 Bag - L 412326 172 mm 146 mm 40 mm 25 mm 1 Bag - L 412333 191
361 Pagina’s | Geldig tot 12/2024 | Vorige pagina | Volgende pagina
Kies uw taal
Juridische kwesties
De fabrikant is exclusief verantwoordelijk voor de inhoud, prijs en artikeldetails van de producten en aanbiedingen in de catalogi. Technische en optische wijzigingen door de fabrikant en fouten voorbehouden.
Aanvraagformulier voor speciale producten
De ToolTeam® Inkoopservice
Bent u op zoek naar producten die wel in de catalogus staan maar niet direct online te koop zijn?Onze aankoopdienst zal u graag een niet-bindend en individueel aanbod doen.