FLOTT Plus Series Pagina 9
Commercieel klantenaanbod**Producten uit de cataloguspagina
excl. verzending
excl. verzending
excl. verzending
excl. verzending
excl. verzending
excl. verzending
excl. verzending
excl. verzending
excl. verzending
excl. verzending
excl. verzending
SB 30 NC Plus SB 40 SB 40 MV SB 40 NC Figure with option Figure with option Figure with option Plus Plus Plus 3 year limited warranty for single-shift operation (can be extended to 5 years on request for an extra charge) Figure with option Technical data SB 30 NC Plus SB 40 Plus SB 40 MV Plus SB 40 NC Plus Continuous/normal drilling capacity (mm) in E335/ ST60 R1 27/32 R2 25/30 R3 30/35 R1 30/35 R2 27/32 R3 35/40 R1 30/35 R2 27/32 R3 35/40 R1 30/35 R2 27/32 R3 35/40 Maximum thread cutting capacity * (depending on gradient) R1 M24 x 3 * R2 M20 x 2,5 * R3 M30 x 3,5 * R1 M30 x 3,5 * R2 M24 x 3 * R3 M36 x 4 * R1 M30 x 3,5 * R2 M24 x 3 * R3 M36 x 4 * R1 M30 x 3,5 * R2 M24 x 3 * R3 M36 x 4 * Spindle holder MK III MK IV MK IV MK IV Drilling depth (mm) 125 160 160 160 Dist. spindle to colum (mm) 300 300 300 300 Column diameter (mm) 125 140 140 140 Speed /drilling depth display digital/digital digital/digital digital/digital digital/digital Drill depth stop Drill depth stop with exact adjustment Drill depth stop with exact adjustment Drill depth stop with exact adjustment Drill depth stop with exact adjustment Feed rate (mm/rev.) freely-programmable (0-1.5 m/min) Infinitely variable feed rate/return stroke manually 0.10/0.16/0.25 freely-programmable (0-1.5 m/min) Infinitely variable feed rate/return stroke Drill bit /table height adjustment Table height adjustment via rack Table height adjustment via rack Table height adjustment via rack Table height adjustment via rack Usable work surface W x L (mm) 590x450 590x450 590x450 590x450 Variable spindle speeds (1/min) R1 0-1,000 R2 0-1,600 R3 0-4,000 R1 0-1,000 R2 0-1,600 R3 0-4,000 R1 0-1,000 R2 0-1,600 R3 0-4,000 R1 0-1,000 R2 0-1,600 R3 0-4,000 Mains voltage (V/Hz) 400/50-60 400/50-60 400/50-60 400/50-60 Drive (kW) Three-phase motor 3.0 frequency-controlled Three-phase motor 4.0 frequency-controlled Three-phase motor 4.0 frequency-controlled Three-phase motor 4.0 frequency-controlled Dimensions (mm) 610x900x1,980 610x900x1,980 610x900x1,980 610x900x1,980 Weight without pckg (kg) 400 400 420 440 Order No. R1 230.510 R2 230.511 R3 230.512 R1 230.530 R2 230.531 R3 230.532 R1 230.535 R2 230.536 R3 230.537 R1 230.540 R2 230.541 R3 230.542 including additional panel for automatic operating mode Subject to technical changes. including additional panel for automatic operating mode
10 Pagina’s | Geldig tot 07/2023 | Vorige pagina | Volgende pagina
Kies uw taal
Juridische kwesties
De fabrikant is exclusief verantwoordelijk voor de inhoud, prijs en artikeldetails van de producten en aanbiedingen in de catalogi. Technische en optische wijzigingen door de fabrikant en fouten voorbehouden.
Aanvraagformulier voor speciale producten
De ToolTeam® Inkoopservice
Bent u op zoek naar producten die wel in de catalogus staan maar niet direct online te koop zijn?Onze aankoopdienst zal u graag een niet-bindend en individueel aanbod doen.