Eurotec catalogue fastening technology Pagina 272
Commercieel klantenaanbod**Beste verkopers van Eurotec
Timber engineering In the next step, we take a closer look at the interference frequency. To this end, we look at the graphs below and can thus conclude that the sound reduction in the low frequency range has deteriorated. Low frequencies (basses) can only be isolated by mass. The frequencies to be isolated for building acoustics start in the 80 Hz range, so this is negligible. 80 Hz can be assumed if no interference frequencies are specified. The sound reduction in dB can be determined in two ways: Transmission factor [dB] 1: Based on an interference frequency of 80 Hz, a sound reduction of approx. 17 dB can be read off the following graph. These values are achieved under ideal conditions (optimum room temperature, room humidity, etc.). 20,00 15,00 10,00 5,00 0,00 0 20 40 60 80 100 120 140 160 -5,00 -10,00 -15,00 -17/80 -20,00 -25,00 -30,00 Disturbing frequency [Hz] 2: A sound insulation factor can be calculated from the natural frequency identified previously (27 Hz) and the specified interference frequency (80 Hz). Sound insulation factor f/f0: Interference frequency / natural frequency → 80 Hz / 27 Hz ≈ 2,96 © samserius – stock.adobe.com The sound reduction can then be read off based on the factor calculated previously. This is 17 dB under ideal conditions. 272
444 Pagina’s | Geldig tot 12/2024 | Vorige pagina | Volgende pagina
Kies uw taal
Juridische kwesties
De fabrikant is exclusief verantwoordelijk voor de inhoud, prijs en artikeldetails van de producten en aanbiedingen in de catalogi. Technische en optische wijzigingen door de fabrikant en fouten voorbehouden.
Aanvraagformulier voor speciale producten
De ToolTeam® Inkoopservice
Bent u op zoek naar producten die wel in de catalogus staan maar niet direct online te koop zijn?Onze aankoopdienst zal u graag een niet-bindend en individueel aanbod doen.