Eurotec catalogue fastening technology Pagina 226
Commercieel klantenaanbod**Beste verkopers van Eurotec
Timber engineering KonstruX ST with cylinder head and drill point 6,5 mm: Axial pull-out load capacity without pre-drilling Dimensions Axial pull-out load capacity without pre-drilling Characteristic value of the joint‘s loadbearing capacity Rax,k to ETA-11/0024 Ød1 x L [mm] A [mm] B [mm] Rax,k a) - [kN] Rk a) - [kN] Rax,k a) - [kN] Rk a) - [kN] Rax,k a) - [kN] αA= 90° αB= 45° α= 45° Rk a) - [kN] Rax,k a) - [kN] αA= 90° αB= 90° αA= 45° αB= 90° 6,5 x 160 60 80 5,51 3,90 5,51 3,90 5,51 3,90 5,51 3,90 6,5 x 195 80 80 6,04 4,27 6,04 4,27 6,04 4,27 6,04 4,27 Calculation according to ETA-11/0024. Wood density ρk= 380 kg/m³. All mechanical values provided should be viewed as subject to the assumptions that have been made and represent example calculations. All values are calculated minimum values and are subject to typographical and printing errors. a) The characteristic values of the load-bearing capacity Rk cannot be treated as equivalent to the max. possible load (the max. force). Characteristic values of the load-bearing capacity Rk should be reduced to dimensioning values Rd with regard to the usage class and class of the load duration: Rd= Rk · kmod / γM. The dimensioning values of the load-bearing capacity Rd should be contrasted with the dimensioning values of the loads (Rd ≥ Ed). 226 Rk a) - [kN]
444 Pagina’s | Geldig tot 12/2024 | Vorige pagina | Volgende pagina
Kies uw taal
Juridische kwesties
De fabrikant is exclusief verantwoordelijk voor de inhoud, prijs en artikeldetails van de producten en aanbiedingen in de catalogi. Technische en optische wijzigingen door de fabrikant en fouten voorbehouden.
Aanvraagformulier voor speciale producten
De ToolTeam® Inkoopservice
Bent u op zoek naar producten die wel in de catalogus staan maar niet direct online te koop zijn?Onze aankoopdienst zal u graag een niet-bindend en individueel aanbod doen.