Eurotec catalogue fastening technology Pagina 224
Commercieel klantenaanbod**Beste verkopers van Eurotec
Timber engineering When analysed, the minimum distances for KonstruX screws in pre-drilled holes that are loaded in a crosswise direction are as follows according to the position of the direction of the grain Minimum distances for KonstruX screws in pre-drilled holes that are loaded in a crosswise direction with a force / fibre angle of 0° and 90° Force / fibre angle α = 0° Force / fibre angle α = 90° Axial distance parallel to the direction of the grain a1 [mm] 5∙d 33 4∙d 33 Axial distance perpendicular to the direction of the grain a2 [mm] 3∙d 20 4∙d 33 Distance from the centre of gravity of the screw area driven into the wood from the unloaded end of the end grain a3,c [mm] 7∙d 46 7∙d 46 Distance from the centre of gravity of the screw area driven into the wood from the loaded end of the end grain a3,t [mm] 12 ∙ d 78 7∙d 46 Axial distance perpendicular to the unloaded edge a4,c [mm] 3∙d 20 3∙d 20 Axial distance from the loaded edge a4,t [mm] 3∙d 20 7∙d 46 When analysed, the minimum distances for KonstruX in non-pre-drilled holes, loaded in a crosswise direction, are as follows according to the position of the direction of the grain Minimum distances for KonstruX screws in non-pre-drilled holes that are loaded in a crosswise direction with a force / fibre angle of 0° and 90° Force / fibre angle α = 0° 224 Force / fibre angle α = 90° Axial distance parallel to the direction of the grain a1 [mm] 12 ∙ d 78 5∙d 33 Axial distance perpendicular to the direction of the grain a2 [mm] 5∙d 33 5∙d 33 Distance from the centre of gravity of the screw area driven into the wood from the unloaded end of the end grain a3,c [mm] 10 ∙ d 65 10 ∙ d 65 Distance from the centre of gravity of the screw area driven into the wood from the loaded end of the end grain a3,t [mm] 15 ∙ d 98 10 ∙ d 65 Axial distance perpendicular to the unloaded edge a4,c [mm] 5∙d 33 5∙d 33 Axial distance from the loaded edge a4,t [mm] 5∙d 33 10 ∙ d 65
444 Pagina’s | Geldig tot 12/2024 | Vorige pagina | Volgende pagina
Kies uw taal
Juridische kwesties
De fabrikant is exclusief verantwoordelijk voor de inhoud, prijs en artikeldetails van de producten en aanbiedingen in de catalogi. Technische en optische wijzigingen door de fabrikant en fouten voorbehouden.
Aanvraagformulier voor speciale producten
De ToolTeam® Inkoopservice
Bent u op zoek naar producten die wel in de catalogus staan maar niet direct online te koop zijn?Onze aankoopdienst zal u graag een niet-bindend en individueel aanbod doen.