Eurotec catalogue fastening technology Pagina 22
Commercieel klantenaanbod**Beste verkopers van Eurotec
Deck construction and landscaping massaranduba low medium (Manilkara spp.) high BULK DENSITY COMPRESSIVE STRENGTH General details: • origin: Northern to central South America, trade name encompasses various species • Colour: Meaty red colour, later darkening to dark brown • Durability class: 1–2 • Properties: High swelling and shrinkage, satisfactory to moderate dimensional stability, extremely high strength, high hardness, homogeneous texture. DEFLECTION RESISTANCE Application: Deck construction, floors subject to heavy loads, noise barriers and privacy screens, fencing, structural timber, sometimes used in water engineering. E-MODULUS HARDNESS DURABILITY DIMENSIONAL STABILITY – Extremely low dimensional stability – often originates from overexploitation (use only certified timber wherever possible) – We consider permanent, secure fastening to be highly critical + High durability + Extremely high strength + High hardness Kapur Installation instructions: The installation is extremely dependent on the timber’s moisture level. The wood moisture must always be determined before installation. Ask your timber supplier for more information. Fastening recommendation: For timbers with high wood density and/or moderate dimensional stability, direct fastening of the boards is preferable to indirect. This applies above all to board thicknesses > 25 mm. For direct fastening, use Terrassotec A4 5,5 mm in combination with the Dista-Leiste 2.0 or profile drilling screw A4 5,5 mm for Eurotec aluminium profiles. It is always advisable to drill a pilot hole with a drill stop. Nevertheless, we cannot provide a general recommendation, as damage is repeatedly found to occur with this type of timber. (Dryobalanops spp.) low medium high BULK DENSITY COMPRESSIVE STRENGTH General details: • origin: Southeast Asia, trade name encompasses various species • Colour: Orange to reddish brown, darkening to brown • Durability class: 1–2 • Properties: Moderate to high swelling and shrinkage, satisfactory to moderate dimensional stability, homogeneous texture. DEFLECTION RESISTANCE Application: Deck construction, fencing, structural timber E-MODULUS HARDNESS Installation instructions: • Centre distance in substructure: max. 60 cm • Joint width between the boards: 6 to 10 mm • Spacing between the butt joints: 3 to 4 mm DURABILITY DIMENSIONAL STABILITY + High durability Ipé, – Possible erosion of constituent substances in the timber – often originates from overexploitation (use only certified timber wherever possible) – moderate hardness – moderate dimensional stability Fastening recommendation: For timbers with high wood density and/or moderate dimensional stability, direct fastening of the boards is preferable to hidden. This applies above all to board thicknesses > 25 mm. For direct fastening, use Terrassotec A4 5,5 mm or Profile drilling screw A4 5,5 mm for Eurotec aluminium profiles. It is always advisable to drill a pilot hole with a drill stop. Lapacho (Tabebuia spp.) low medium high BULK DENSITY COMPRESSIVE STRENGTH General details: • origin: Northern to central South America, trade name encompasses various species • Colour: Light brown to light yellowish brown, later darkening to brown to olive brown • Durability class: 1–2 • Properties: Moderate to high swelling and shrinkage, good dimensional stability, extremely high strength, very high hardness, homogeneous texture. DEFLECTION RESISTANCE Application: Deck construction, bridge construction and shipbuilding, floating jetties, fencing, parquet, floors subject to heavy loads, approved structural timber, sometimes used in water engineering. E-MODULUS HARDNESS DURABILITY DIMENSIONAL STABILITY + High durability + good dimensional stability + Extremely high strength + Very high hardness + approved structural timber – often originates from overexploitation (use only certified timber wherever possible) Installation instructions: • Centre distance in substructure: max. 60 cm • Joint width between the boards: 6 to 8 mm • Spacing between the butt joints: 3 to 4 mm Fastening recommendation: For timbers with high wood density and/or moderate dimensional stability, direct fastening of the boards is preferable to hidden. This applies above all to board thicknesses > 25 mm. For direct fastening: Terrassotec, hardened stainless steel, 5,0 and 5,5 mm; Hapatec, hardened stainless steel, 5,0 mm; or Profile drilling screw, hardened stainless steel, 5,5 mm for Eurotec aluminium profiles. It is always advisable to drill a pilot hole with a drill stop. *Solid wood decking is not part of our product range. This short overview represents a planning aid. 22
444 Pagina’s | Geldig tot 12/2024 | Vorige pagina | Volgende pagina
Kies uw taal
Juridische kwesties
De fabrikant is exclusief verantwoordelijk voor de inhoud, prijs en artikeldetails van de producten en aanbiedingen in de catalogi. Technische en optische wijzigingen door de fabrikant en fouten voorbehouden.
Aanvraagformulier voor speciale producten
De ToolTeam® Inkoopservice
Bent u op zoek naar producten die wel in de catalogus staan maar niet direct online te koop zijn?Onze aankoopdienst zal u graag een niet-bindend en individueel aanbod doen.