Eurotec catalogue fastening technology Pagina 184
Commercieel klantenaanbod**Beste verkopers van Eurotec
Timber engineering Horizontal wall or beam: Set upright, then lift CLT wall or beam Connection in the End grain area Connector Lifting Anchor Mini Ø 40 mm + 8 x VSS 6 x 60 Stop bracket β 30° 248 45° 295 60° 318 75° 328 β 90° Horizontal CLT wall or beam Notes: ● The tables are based on the expert evaluation report entitled ‘LoadCarrying Capacity of Connections with E.u.r.o. Tec HebeFix Mini Lifting Anchors’ by H.J. Blaß, 01/12/2020. ● The tables illustrate the ‘Horizontal wall or beam: Set upright, then lift’ load case. ● The table values are only valid for lifting or assembly states. ● The minimum cross-section thickness for walls and beams is 100 mm. ● The minimum distances between the edges of the connectors parallel to the component plane is 200 mm. ● The connectors must be screwed into the components’ centre plane flush, plus perpendicular to the surfaces of the narrow sides and side or end grain areas. ● The values in the table apply to characteristic raw densities of min. 350 kg/m³ for CLT and 385 kg/m³ for GLT. ● According to the above-mentioned expert report, a vibration coefficient of min ϕ = 2,0 must be used. ● The values stated in the table take a vibration coefficient of ϕ = 2,0. into account. For deviating vibration coefficients, the table values must be ultiplied by the factor 2,0/ϕ. 184 Total weight [kg] with 2 strands Vertical CLT wall or beam with n strands n x 166
444 Pagina’s | Geldig tot 12/2024 | Vorige pagina | Volgende pagina
Kies uw taal
Juridische kwesties
De fabrikant is exclusief verantwoordelijk voor de inhoud, prijs en artikeldetails van de producten en aanbiedingen in de catalogi. Technische en optische wijzigingen door de fabrikant en fouten voorbehouden.
Aanvraagformulier voor speciale producten
De ToolTeam® Inkoopservice
Bent u op zoek naar producten die wel in de catalogus staan maar niet direct online te koop zijn?Onze aankoopdienst zal u graag een niet-bindend en individueel aanbod doen.