ERCOLINA bending technology catalog Pagina 96
Commercieel klantenaanbod**Producten uit de cataloguspagina
TOOLING FOR ERCOPRESS For EP45 and EP25 TOOLING FOR BAR FOLDING Art. EP2MS4V EP2MS85-80 EP2MS80-140 EP25-0008-00 EP45PC EPL60R5 Description 4 V prism (16 - 22 - 35 - 50 mm width) height 200 mm. Max capacity flat bar 200 x 6 mm at 90° 80 mm V prism, height 200 mm. Max capacity flat bar 200 x 10 mm at 90° 140 mm V prism, height 200 mm. Max capacity flat bar 200 x 15 mm (for EP25) and 200 x 20 mm (for EP45) at 90° EP2MS85-80 EP2MS80-140 EP25-0008-00 EP45PC Bending insert holder height 200 mm, including radius 3 mm insert for bending flat bar max capacity 200 x 6 mm (for EP25) Bending insert holder height 200 mm, including radius 3 mm insert for bending flat bar max capacity 200 x 10 mm (for EP45) Insert radius 5 mm height 200 mm. Max capacity flat bar 200 x 10 mm (for EP25) EP4CR5 Insert radius 10 mm height 200 mm. Max capacity flat bar 200 x 15 mm (for EP25) Insert radius 5 mm height 200 mm. Max capacity flat bar 200 x 12 mm (for EP45) EP4CR10 Insert radius 10 mm height 200 mm. Max capacity flat bar 200 x 15 mm (for EP45) EP4CR15 Insert radius 15 mm height 200 mm. Max capacity flat bar 200 x 20 mm (for EP45) EPL60R10 EP2MS4V EPL60R10 EP4CR5 For dimensions in inches, see conversion table on page 97. TOOLING FOR TUBE EXPANSION / REDUCTION Art. EP250-G1 EP250-G2 EP250-E1* EP250-E2* EP250-R1* EP250-R2* EP250-F1 EP250-F2 EP250-C1 EP250-C2 Description Tube holding jaws (set of 2) Ø from 10 to 48 mm. Specify exact Ø Tube holding jaws (set of 2) Ø from 49 to 76 mm. Specify exact Ø Tube expansion punch Ø from 10 to 48 mm. Specify exact Ø and wall thickness Tube expansion punch Ø from 49 to 76 mm. Specify exact Ø and wall thickness Tube reduction punch Ø from 10 to 48 mm. Specify exact Ø and wall thickness Tube reduction punch Ø from 49 to 76 mm. Specify exact Ø and wall thickness Flat flanging punch Ø from 10 to 48 mm. Specify exact Ø and wall thickness Flat flanging punch Ø from 49 to 76 mm. Specify exact Ø and wall thickness 45° conical flanging punch Ø from 10 to 48 mm. Specify exact Ø and wall thickness 45° conical flanging punch Ø from 49 to 76 mm. Specify exact Ø and wall thickness EP250-G1/G2 EP250-E1/E2 EP250-R1/R2 EP250-F1/F2 EP250-C1/C2 * Max work length of tube = 2 x Ø. For higher lengths contact the Manufacturer for feasability study. For dimensions in inches, see conversion table on page 97. 94 MW / E / A
104 Pagina’s | Geldig tot 12/2023 | Vorige pagina | Volgende pagina
Juridische kwesties
De fabrikant is exclusief verantwoordelijk voor de inhoud, prijs en artikeldetails van de producten en aanbiedingen in de catalogi. Technische en optische wijzigingen door de fabrikant en fouten voorbehouden.
Aanvraagformulier voor speciale producten
De ToolTeam® Inkoopservice
Bent u op zoek naar producten die wel in de catalogus staan maar niet direct online te koop zijn?Onze aankoopdienst zal u graag een niet-bindend en individueel aanbod doen.