AMF Catalogue Hydraulic clamping systems Pagina 270
Commercieel klantenaanbod**Beste verkopers van AMF Spannsysteme
excl. verzending
excl. verzending
excl. verzending
excl. verzending
excl. verzending
excl. verzending
excl. verzending
excl. verzending
excl. verzending
excl. verzending
excl. verzending
excl. verzending
excl. verzending
excl. verzending
excl. verzending
excl. verzending
excl. verzending
excl. verzending
excl. verzending
excl. verzending
excl. verzending
excl. verzending
excl. verzending
excl. verzending
excl. verzending
excl. verzending
excl. verzending
excl. verzending
excl. verzending
excl. verzending
excl. verzending
excl. verzending
excl. verzending
excl. verzending
excl. verzending
excl. verzending
excl. verzending
excl. verzending
excl. verzending
Valves No. 6918-100 Order no. Delay valve For O-ring connection, for the release clamping circuit, max. operating pressure 350 bar, min. operating pressure 35 bar. CAD 556992 Weight [µm] OR-1 O-ring Order No. 25 474429 1970 Article no. Setting range *** for the delay Q max. Filter mesh [s] [l/min] 6918-100 3-7 11,4 [g] *** The duration of the delay can vary, depending on the viscosity of the oil in the application. This statement is valid with ISO 32 Oil. Design: Delay valve with NG 6. The hole pattern is not standardised. Valve housing made of steel, interior parts made of stainless steel. The fastening bolts M6x60 (order no. 115634) are not supplied as standard. Oil supply via oil channel in fixture body. Application: With this valve, unclamping of selected components can be delayed during the release process. The delay can be achieved within a circuit. A parallel circuit with several delay valves is possible. Features: In the release process, hydraulic clamping and support elements or workpieces can be protected from overload. The consumers can be selectively controlled through a controlled sequence of the pressure reduction in the clamping circuit. Note: Observe installation instructions with construction notes for the fixture manufacturer. The flange surface of the fixture must have an evenness of 0.08 and a surface quality of Rz 6.3. Application example: Link clamp 2 Link clamp 1 Pressure sequence valve set for 60 bar workpiece 3 fixed installation points Support element Pressure sequence valve set for 40 bar Link clamp 3 Valve unit with switch delay Clamp hydraulically Release hydraulically Directional valve in zero position System pressure set for 70 bar In this application example, the support element is protected from overload by the delay valve during the release procedure of the link clamp 1 opposite. The delay valve ensures that the pressure at the link clamp 1 is removed before the pressure on the support element dissipates. Subject to technical alterations. 270 Hydraulic clamping systems ANDREAS MAIER GmbH & Co. kg ∙ Phone: +49 711 5766-196 ∙ Web: www.amf.de
384 Pagina’s | Geldig tot 12/2025 | Vorige pagina | Volgende pagina
Kies uw taal
Juridische kwesties
De fabrikant is exclusief verantwoordelijk voor de inhoud, prijs en artikeldetails van de producten en aanbiedingen in de catalogi. Technische en optische wijzigingen door de fabrikant en fouten voorbehouden.
Aanvraagformulier voor speciale producten
De ToolTeam® Inkoopservice
Bent u op zoek naar producten die wel in de catalogus staan maar niet direct online te koop zijn?Onze aankoopdienst zal u graag een niet-bindend en individueel aanbod doen.
