AMF Catalogue Hydraulic clamping systems Pagina 224
Commercieel klantenaanbod**Beste verkopers van AMF Spannsysteme
excl. verzending
excl. verzending
excl. verzending
excl. verzending
excl. verzending
excl. verzending
excl. verzending
excl. verzending
excl. verzending
excl. verzending
excl. verzending
excl. verzending
excl. verzending
excl. verzending
excl. verzending
excl. verzending
excl. verzending
excl. verzending
excl. verzending
excl. verzending
excl. verzending
excl. verzending
excl. verzending
excl. verzending
excl. verzending
excl. verzending
excl. verzending
excl. verzending
excl. verzending
excl. verzending
excl. verzending
excl. verzending
excl. verzending
excl. verzending
excl. verzending
excl. verzending
excl. verzending
excl. verzending
excl. verzending
support element No. 6964L Article no. Order no. Support Element, cartridge flange Normally retracted. Air advanced, max. operating pressure 350 bar, min. operating pressure 50 bar. CAD Contact force F1 Support force at 350 bar Stroke C Vol. Md max. Weight [N] [kN] [mm] [cm³] [Nm] [g] 165167 6964L-04-1 17,5* 4,4 6,5 0,16 40,5 150 165183 6964L-11-1 35,5* 11,0 9,5 0,33 40,5 340 * Contact force with max. 1.7 bar air pressure. Design: Cylinder body from steel, hardened. Support pin with internal thread case hardened and ground. Wiper to protect against dirt and cooling water. Internal parts from stainless steel. Oil supply via oil channel in fixture body. Application: The support element is used as an extra support to prevent sagging and vibration of a workpiece. Features: Element with high load capacity and low height. Pneumatic: the plunger is normally retracted. Sensitive adjustment of contact force by varying the air pressure. Note: Support pin must be protected against the entry of dirt and splash water by fitting a set screw or plug. When placing into operation, ensure that all air is bled from the system. Failure to do so can cause destruction of the clamping element by the escaping diesel effect. The supporting force should be matched to the clamping force in order to absorb machining forces. The supporting force should always be at least twice as high as the clamping force. Dimensions: Order no. Article no. dia. A B D E F G J x depth dia. M SW OR-1 O-ring Order No. DI-1 Seal Order No. 165167 6964L-04-1 16,0 41,0 40,5 5,5 7,5 M26x1,5 M6x7,5 24 23 479550 346270 165183 6964L-11-1 20,5 52,5 49,5 6,5 8,5 M35x1,5 M8x6,0 31 30 479618 550211 Subject to technical alterations. 224 Hydraulic clamping systems ANDREAS MAIER GmbH & Co. kg ∙ Phone: +49 711 5766-196 ∙ Web: www.amf.de
384 Pagina’s | Geldig tot 12/2025 | Vorige pagina | Volgende pagina
Kies uw taal
Juridische kwesties
De fabrikant is exclusief verantwoordelijk voor de inhoud, prijs en artikeldetails van de producten en aanbiedingen in de catalogi. Technische en optische wijzigingen door de fabrikant en fouten voorbehouden.
Aanvraagformulier voor speciale producten
De ToolTeam® Inkoopservice
Bent u op zoek naar producten die wel in de catalogus staan maar niet direct online te koop zijn?Onze aankoopdienst zal u graag een niet-bindend en individueel aanbod doen.
