AMF Catalogue Hydraulic clamping systems Pagina 222
Commercieel klantenaanbod**Beste verkopers van AMF Spannsysteme
excl. verzending
excl. verzending
excl. verzending
excl. verzending
excl. verzending
excl. verzending
excl. verzending
excl. verzending
excl. verzending
excl. verzending
excl. verzending
excl. verzending
excl. verzending
excl. verzending
excl. verzending
excl. verzending
excl. verzending
excl. verzending
excl. verzending
excl. verzending
excl. verzending
excl. verzending
excl. verzending
excl. verzending
excl. verzending
excl. verzending
excl. verzending
excl. verzending
excl. verzending
excl. verzending
excl. verzending
excl. verzending
excl. verzending
excl. verzending
excl. verzending
excl. verzending
excl. verzending
excl. verzending
excl. verzending
support element No. 6964F Article no. Order no. Support Element, cartridge flange Normally extended. Spring advanced, max. operating pressure 350 bar, min. operating pressure 50 bar. CAD Contact force F1 Support force at 350 bar Stroke C Vol. Md max. Weight [N] [kN] [mm] [cm³] [Nm] [g] 165092 6964F-04-1 4,5-9,0 4,4 6,5 0,16 40,5 160 165100 6964F-11-1 9,0-26,5 11,0 9,5 0,33 40,5 320 Design: Cylinder body from steel, hardened. Support pin with internal thread case hardened and ground. Wiper to protect against dirt and cooling water. Internal parts from stainless steel. Oil supply via oil channel in fixture body. Application: The support element is used as an extra support to prevent sagging and vibration of a workpiece. Features: Element with high load capacity and low height. Spring extension: the plunger is normally extended. Variable spring setting permits sensitive adjustment of contact force. Note: Support pin must be protected against the entry of dirt and splash water by fitting a set screw or plug. When placing into operation, ensure that all air is bled from the system. Failure to do so can cause destruction of the clamping element by the escaping diesel effect. The supporting force should be matched to the clamping force in order to absorb machining forces. The supporting force should always be at least twice as high as the clamping force. Dimensions: Article no. dia. A B D E F 165092 6964F-04-1 16,0 47,5 40,5 5,5 7,5 165100 6964F-11-1 20,5 62,0 49,5 6,5 8,5 Order no. J x depth dia. M SW OR-1 O-ring Order No. DI-1 Seal Order No. M26 x1,5 M8x7,5 24 23 479550 346270 M35 x 1,5 M10x11,5 31 30 479618 550211 G Subject to technical alterations. 222 Hydraulic clamping systems ANDREAS MAIER GmbH & Co. kg ∙ Phone: +49 711 5766-196 ∙ Web: www.amf.de
384 Pagina’s | Geldig tot 12/2025 | Vorige pagina | Volgende pagina
Kies uw taal
Juridische kwesties
De fabrikant is exclusief verantwoordelijk voor de inhoud, prijs en artikeldetails van de producten en aanbiedingen in de catalogi. Technische en optische wijzigingen door de fabrikant en fouten voorbehouden.
Aanvraagformulier voor speciale producten
De ToolTeam® Inkoopservice
Bent u op zoek naar producten die wel in de catalogus staan maar niet direct online te koop zijn?Onze aankoopdienst zal u graag een niet-bindend en individueel aanbod doen.
