AMF Catalogue Hydraulic clamping systems Pagina 114
Commercieel klantenaanbod**Beste verkopers van AMF Spannsysteme
excl. verzending
excl. verzending
excl. verzending
excl. verzending
excl. verzending
excl. verzending
excl. verzending
excl. verzending
excl. verzending
excl. verzending
excl. verzending
excl. verzending
excl. verzending
excl. verzending
excl. verzending
excl. verzending
excl. verzending
excl. verzending
excl. verzending
excl. verzending
excl. verzending
excl. verzending
excl. verzending
excl. verzending
excl. verzending
excl. verzending
excl. verzending
excl. verzending
excl. verzending
excl. verzending
excl. verzending
excl. verzending
excl. verzending
excl. verzending
excl. verzending
excl. verzending
excl. verzending
excl. verzending
excl. verzending
swing clamps No. 6951KP Swing clamp, top-flange-mounting, precision design CAD Single-acting, with spring return, max. operating pressure 350 bar, min. operating pressure 52 bar. Article no. Clamping force at 350 bar* [kN] Clamping stroke M Total stroke N Vol. effective piston area Q max. * [mm] [mm] [cm³] [cm²] [l/min] [g] 327734 6951KP-02-11 2,0 5,5 14,0 0,92 0,63 0,276 372 327759 6951KP-02-12 2,0 5,5 14,0 0,92 0,63 0,276 372 327767 6951KP-05-11 4,9 8,0 20,0 3,82 1,90 0,764 903 327783 6951KP-05-12 4,9 8,0 20,0 3,82 1,90 0,764 903 327809 6951KP-11-11 11,6 13,0 29,5 11,90 4,04 1,785 1520 327825 6951KP-11-12 11,6 13,0 29,5 11,90 4,04 1,785 1520 Order no. Weight Ending of item no.: -11 = single-action, right-pivoting / -12 = single-action, left-pivoting * details with clamp arm, standard Design: Cylinder barrel made of steel, hardened and burnished. Piston rod case hardened and chrome plated. Piston rod with internal thread and clamp arm positioning. O-ring for flange seal. Wiper on the piston rod. Return spring from stainless steel. Clamp arm not supplied as standard. Oil supply via threaded connection or oil channel in the fixture body. Application: The swivel clamp is used in fixtures in which the workpiece must be freely accessible and inserted from above. Even workpieces with difficult shapes can be clamped using special clamp arms (available on request). Features: The swing motion is executed via three ball guides, thereby increasing positioning accuracy, repeat accuracy and service life. Note: The piston stoke is executed with spheres, so volume flow Q max. must be complied with. Clamping arm length and clamping arm weight must be strictly observed. No force may be applied to the piston when mounting accessories to it. To equalise height differences on the workpiece, the vertical clamping path must be 50% of the clamping stroke. For single-acting cylinders, there is a risk of coolant being sucked through the breather port. In such cases the breather port has to be moved to a clean protected area via a connection line. When placing into operation, ensure that all air is bled from the system. To control the oil feed, the throttle/check valve no. 6916-1201 can be optionally used with G1/8 and 6916-12-04 with G1/4 . To achieve a controlled clamping sequence, there is the option of screwing the sequence valve 6918-XX-XXX directly into the threaded connection. Other swivel angles are available on request. Subject to technical alterations. 114 Hydraulic clamping systems ANDREAS MAIER GmbH & Co. kg ∙ Phone: +49 711 5766-196 ∙ Web: www.amf.de
384 Pagina’s | Geldig tot 12/2025 | Vorige pagina | Volgende pagina
Kies uw taal
Juridische kwesties
De fabrikant is exclusief verantwoordelijk voor de inhoud, prijs en artikeldetails van de producten en aanbiedingen in de catalogi. Technische en optische wijzigingen door de fabrikant en fouten voorbehouden.
Aanvraagformulier voor speciale producten
De ToolTeam® Inkoopservice
Bent u op zoek naar producten die wel in de catalogus staan maar niet direct online te koop zijn?Onze aankoopdienst zal u graag een niet-bindend en individueel aanbod doen.