AMF Catalogue Hydraulic clamping systems Pagina 106
Commercieel klantenaanbod**Beste verkopers van AMF Spannsysteme
excl. verzending
excl. verzending
excl. verzending
excl. verzending
excl. verzending
excl. verzending
excl. verzending
excl. verzending
excl. verzending
excl. verzending
excl. verzending
excl. verzending
excl. verzending
excl. verzending
excl. verzending
excl. verzending
excl. verzending
excl. verzending
excl. verzending
excl. verzending
excl. verzending
excl. verzending
excl. verzending
excl. verzending
excl. verzending
excl. verzending
excl. verzending
excl. verzending
excl. verzending
excl. verzending
excl. verzending
excl. verzending
excl. verzending
excl. verzending
excl. verzending
excl. verzending
excl. verzending
excl. verzending
excl. verzending
sWiNg CLamps – tHE Solution For coSt-EFFEctiVE HyDraulic clamPing oF WorkPiEcES! dEsigN: Burnished body, hardened and ground piston rod. Swing clamps are delivered without clamping arm. appLiCatiON: Swing clamps are used in fixtures of all kinds, especially in applications where workpieces must be freely accessible and loaded from above. Workpieces with complex geometries can be clamped using special clamping arms (available upon request). FE aturEs: Design variants: > top flange > base flange > car tridge flange > plug-in mounting top and base-flange models accommodate o-ring as well as threaded hydraulic connections. there are also designs for drilled oil channels. the swing motion is realized by a rigid 3-way ball-guide mechanism. Standard swivel angle is 90°. the tolerance of pivot angle measures ± 3°. the repetition accuracy of the pivot position measures ± 1.5°. the newly designed clamping-arm mount prevents the induction of forces into the swing mechanism during assembly. impOrtaNt NOtE: clamping arm length, ma x. permissible flow rate Q ma x. and clamping arm weight must be observed! in case of a larger flow rates, a throttle/check valve must be connected upstream. the motion of the swing clamp must not be obstructed. clamping must only be done in the vertical stroke area. pOsitiONiNg: Positioning hole for clamp arm: Positioning bore at the piston rod: threaded stud sWiNg dirECtiONs: Positioning hole for clamp arm: clamped position right swinging lef t swinging Positioning hole for clamp arm (6x60°) dEsigN: single acting cylinder double acting cylinder Subject to technical alterations. 106 Hydraulic clamping systems ANDREAS MAIER GmbH & Co. kg ∙ Phone: +49 711 5766-196 ∙ Web: www.amf.de
384 Pagina’s | Geldig tot 12/2025 | Vorige pagina | Volgende pagina
Kies uw taal
Juridische kwesties
De fabrikant is exclusief verantwoordelijk voor de inhoud, prijs en artikeldetails van de producten en aanbiedingen in de catalogi. Technische en optische wijzigingen door de fabrikant en fouten voorbehouden.
Aanvraagformulier voor speciale producten
De ToolTeam® Inkoopservice
Bent u op zoek naar producten die wel in de catalogus staan maar niet direct online te koop zijn?Onze aankoopdienst zal u graag een niet-bindend en individueel aanbod doen.
