ALFRA Catalog Control Cabinet and Control Engineering Pagina 108
Commercieel klantenaanbod**Beste verkopers van ALFRA
excl. verzending
excl. verzending
excl. verzending
excl. verzending
excl. verzending
excl. verzending
excl. verzending
excl. verzending
excl. verzending
excl. verzending
excl. verzending
excl. verzending
excl. verzending
excl. verzending
excl. verzending
excl. verzending
excl. verzending
excl. verzending
excl. verzending
excl. verzending
excl. verzending
excl. verzending
excl. verzending
excl. verzending
excl. verzending
excl. verzending
excl. verzending
excl. verzending
excl. verzending
excl. verzending
excl. verzending
excl. verzending
excl. verzending
excl. verzending
excl. verzending
excl. verzending
excl. verzending
excl. verzending
excl. verzending
excl. verzending
TCT TOOLS – TECHNICAL TERMS Clearance angle is the angle between the carbide teeth and the material to be machined. ALFRA TCT core drills have several clearance angles on a cutting edge. Cutting depth is the maximum material thickness that can be machined with the respective tool (should not be confused with the construction height of the tool). Chip flute gathers up the chips generated or removes these from the borehole. Chip breaker directs the chips from the carbide tooth into the chip flute. Cutting face the chip is formed on this surface. Angle of rake is the angle between the tool axis and the cutting face. Tooth projection is the carbide projection to the core. Tooth height difference is used for the chip splitting. Speed, cutting speed and feed rate (typical values) Rotabest®- TCT hole cutters Not suitable for automatic feed Material Construction steel 50 kp/m2 Steel 50-70 kp/m2 Stainless steel Cast iron Non-ferrous metals, aluminium Exotic alloys m/min 40-60 30-50 18-45 65-95 100-550 10-30 mm/r 0.08-0.12 0.08-0.12 0.8-0.10 0.12-0.20 0.22-0.45 0.05-0.08 Accuracy (reference value) / Input / + 0.10 mm Output /± 0 mm 108
116 Pagina’s | Geldig tot 12/2024 | Vorige pagina | Volgende pagina
Kies uw taal
Juridische kwesties
De fabrikant is exclusief verantwoordelijk voor de inhoud, prijs en artikeldetails van de producten en aanbiedingen in de catalogi. Technische en optische wijzigingen door de fabrikant en fouten voorbehouden.
Aanvraagformulier voor speciale producten
De ToolTeam® Inkoopservice
Bent u op zoek naar producten die wel in de catalogus staan maar niet direct online te koop zijn?Onze aankoopdienst zal u graag een niet-bindend en individueel aanbod doen.
