zoom_in
zoom_out
fullscreen
MUNK Multiple-flight vertical ladder with back protection (machinery) anodised aluminium 12.96m 500236
Artikelnummer: T-842259
In voorraad,klaar voor verzending binnen 48h
Stuk
doneMade in Germany
Multi-section ladder with back protection (machines) anodized aluminum
Inhoud:
1 Stuk
Verzenden:
De verzendkosten voor België konden niet automatisch worden berekend.
Aanbieder:
Verkoop en levering door ToolTeam Köln
Betalingsmethoden:
Retourneren:
Veiligheid:
Productgegevens
Fabrikant:
MUNK GmbH
Voorwaarde:
Nieuw
Artikelnummer:
T-842259
SKU fabrikant:
500236
GTIN-code (EAN):
4031405944008
Gewicht:
118,34 Kg
Alle informatie met betrekking tot producten van MUNK GmbH. Technische en optische wijzigingen van de fabrikant en fouten voorbehouden.
Deze pagina is machinaal vertaald, de originele duitse versie kunt u vinden op here, let ook op de Vertaling Disclaimer.
Productomschrijving
- Range of application
- Access to machinery and mechanical systems.
- Irrespective of the climbing height:
- As a safety railing, back protection is preferable to fall protection (combination is not permitted as the rescue of persons is hindered by the back protection).
- The need for an occupational medical examination for suitability for working at height (e.g. G 41) depends on the risk assessment (e.g. total climbing height, type of safety railing) of the respective vertical ladder systems
- Proof of the load capacity of the underlying surface must be checked and approved for each construction project by a cognizant stability expert
- Barrier (safety door) is always required
- If required by the access situation, vertical ladders with fall protection must be fitted with suitable protective devices (e.g. steel lockable door) to prevent unauthorised use.
- For lateral bridging steps, the ladder sections must run at a higher level
- The overlap of the back protection must be at least 2,000 mm for multiple-flight ladders.
- At unsecured exit points, railings attached to both sides of the vertical ladder or led into the exit level are required
- Gap at exit step must not be larger than 60 – 75 mm
- Step-on dimension: Distance from entry level to the first rung 100–400 mm. The top edge of the uppermost rung must be at the same height as the walking surface of the exit point.
- The clearances between the vertical ladder system and the railing must not exceed 120 mm
- The connection to the fall protection must be established and released from a secured standing position. A secured standing position is, for example, a platform with railing and a secured access
- A safety door, order no. 063502, is required for the exit. This is not included in the scope of delivery of the complete set and must be ordered separately
- The maximum height of the individual ladder sections is 6.0 m
- 12,96m
Gerelateerde resultaten
MUNK Günzburger Steigtechnik
MUNK
climbing technology
Günzburg
step ladders
rung ladders
platform ladders
platform ladders
steps
platforms
floorboards
stairs
oversteps
catwalks
scaffolding
fixed ladders
shaft ladders
material handling
small work platforms
lifts
rescue technology
fire brigade ladders DIN EN 1147
Fire brigade ladders ÖNORM F 4047
rescue platforms
tool boxes / boxes
tool shed equipment
other equipment
vehicle installations
vehicle attachments
roll containers
eRC
Volledige catalogi
Het aanbod is uitsluitend gericht op zakelijke klanten, bedrijven, openbare instellingen, handelaars en freelancers. Alle prijzen in de catalogi zijn exclusief BTW, verzendkosten en eventuele toeslagen.
De fabrikant is exclusief verantwoordelijk voor de inhoud, prijs en artikeldetails van de producten en aanbiedingen in de catalogi. Technische en optische wijzigingen door de fabrikant en fouten voorbehouden.
De fabrikant is exclusief verantwoordelijk voor de inhoud, prijs en artikeldetails van de producten en aanbiedingen in de catalogi. Technische en optische wijzigingen door de fabrikant en fouten voorbehouden.
Productsuggesties
Railing holder
984015
17,05 €
excl. verzending
27,35 € Adviesprijs
excl. verzending
Ladder section stainless steel 7 rungs Stainless steel
68264
395,29 €
excl. verzending
658,05 € Adviesprijs
excl. verzending
Work platform rigid with handrail 4 steps
50044
378,85 €
excl. verzending
630,70 € Adviesprijs
excl. verzending
Ground spikes for ladders up to model year 2004 or ladders without nivello® ladder shoe
19939
38,15 €
excl. verzending
excl. verzending
(19,08 € / Stuk)
61,89 € Adviesprijs
Information sticker for step straight ladders over 3 m with stabiliser Sticker 19085
19174
7,55 €
excl. verzending
excl. verzending
(0,38 € / Stuk)
11,90 € Adviesprijs
Folding transport handle
300109
112,10 €
excl. verzending
184,45 € Adviesprijs
excl. verzending
Bumper strip for face-sided platform
301314
104,19 €
excl. verzending
171,35 € Adviesprijs
excl. verzending
Fruit tree poles suitable for straight ladders 10014 and push-up extension ladders 20214
19946
252,60 €
excl. verzending
420,05 € Adviesprijs
excl. verzending
Railing filling piece
984016
11,20 €
excl. verzending
17,85 € Adviesprijs
excl. verzending
Mobile scaffolding SG 1.35 נ2.45 m with double platform platform height 3.07 m
174337
3.037,15 €
excl. verzending
5.103,90 € Adviesprijs
excl. verzending
Platform stairs 45° movable step width 1,000 mm 8 steps Grooved aluminium
600808
3.200,70 €
excl. verzending
5.378,80 € Adviesprijs
excl. verzending
Platform stairs 45° movable step width 800 mm 10 steps Grooved aluminium
600790
3.340,20 €
excl. verzending
5.613,25 € Adviesprijs
excl. verzending
Mobile scaffolding, 1.35 נ3.0 m, with chassis bar and double platform. Platform height 5.45 m
175535
5.078,65 €
excl. verzending
8.534,69 € Adviesprijs
excl. verzending
Folding scaffolding SG 0.75 x 1.80 m Platform height 3.2 m
115124
2.846,65 €
excl. verzending
4.783,80 € Adviesprijs
excl. verzending
Mobile scaffolding SG 0.75 נ2.45 m with outrigger platform height 6.43 m
155649
5.757,75 €
excl. verzending
9.675,89 € Adviesprijs
excl. verzending
No Review yet
Description: No Review yet
Written by: No Review
Rating: 5 out of 5
5 stars, based on 1
reviews
MUNK Multiple-flight vertical ladder with back protection (machinery) anodised aluminium 12.96m 500236
MUNK Günzburger Steigtechnik
MUNK
climbing technology
Günzburg
step ladders
rung ladders
platform ladders
platform ladders
steps
platforms
floorboards
stairs
oversteps
catwalks
scaffolding
fixed ladders
shaft ladders
material handling
small work platforms
lifts
rescue technology
fire brigade ladders DIN EN 1147
Fire brigade ladders ÖNORM F 4047
rescue platforms
tool boxes / boxes
tool shed equipment
other equipment
vehicle installations
vehicle attachments
roll containers
eRC
- Range of application
- Access to machinery and mechanical systems.
- Irrespective of the climbing height:
- As a safety railing, back protection is preferable to fall protection (combination is not permitted as the rescue of persons is hindered by the back protection).
- The need for an occupational medical examination for suitability for working at height (e.g. G 41) depends on the risk assessment (e.g. total climbing height, type of safety railing) of the respective vertical ladder systems
- Proof of the load capacity of the underlying surface must be checked and approved for each construction project by a cognizant stability expert
- Barrier (safety door) is always required
- If required by the access situation, vertical ladders with fall protection must be fitted with suitable protective devices (e.g. steel lockable door) to prevent unauthorised use.
- For lateral bridging steps, the ladder sections must run at a higher level
- The overlap of the back protection must be at least 2,000 mm for multiple-flight ladders.
- At unsecured exit points, railings attached to both sides of the vertical ladder or led into the exit level are required
- Gap at exit step must not be larger than 60 – 75 mm
- Step-on dimension: Distance from entry level to the first rung 100–400 mm. The top edge of the uppermost rung must be at the same height as the walking surface of the exit point.
- The clearances between the vertical ladder system and the railing must not exceed 120 mm
- The connection to the fall protection must be established and released from a secured standing position. A secured standing position is, for example, a platform with railing and a secured access
- A safety door, order no. 063502, is required for the exit. This is not included in the scope of delivery of the complete set and must be ordered separately
- The maximum height of the individual ladder sections is 6.0 m