Woelm Catalogue HELM Hinging facility Pagina 17
Commercieel klantenaanbod**Producten uit de cataloguspagina
HELM Hinging facility according to EN 795:2012 Typ D Single components Single components Additional accessories HELM Fall restraint system according to EN 353-2 - following on fall restraint system, swivelling, separable from safety rope, with rotary swivel and karabiner, connection length 0.3 m When you use long safety ropes there is the risk of too long fall distances. By means of fall restraint systems the shortest connection from arresting point to the arrester belt is ensured via the safety rope. The clamping restraint systems lock on vertical to horizontal safety ropes and can only be moved in both directions by actuating the handle. EDP no. GC 0525 HELM Safety rope with karabiner 229 EDP no. GC 0515 rope length 5.0 m* Ø 12 mm *other rope lengths on request HELM Lanyard according to EN 354/355 - with friction shock absorber and karabiner Lanyards with shock absorber are for direct belaying of persons at risk of falling and connect the safety belt with an arrest point. EDP no. GC 0510 rope length 2,0 m* Ø 16 mm EDP no. GC 0511 rope length 2,0 m* Ø 12 mm *other rope lengths on request HELM Safety harnesses and safety belts according to EN 361/358 - simple safety hardness with back eyelet according to DIN EN 361, all-purpose, simple to put on aluminium or steel construction Depending on the application area the safety harnesses can also be fitted with additional shoulder and/or leg pads as well as additional back support. EDP no. GC 0505 HELM Fall arrest inertia reel according to EN 360 - in plastic housing with rotary swivel suspension and wire rope - wire rope length of 3 - 24 m Fall arrest inertia reels are used for protecting against falls from heights. They are fitted with a retractable wire rope or belt webbing. The devices use a recuperating spring, thus keeping the rope/webbing under tension all the time. In case of a fall or in the event of exceeding the work speed (approx. 1.5m/sec.) the retaining ratchets catch through centrifugal forces. The required fall absorption is achieved by a braking system. EDP no. e. g. GC 0530 rope length 4,5 m* e. g. GC 0532 rope length 9,0 m* *other rope lengths on request 17 TEH_12/11.2017
20 Pagina’s | Geldig tot 01/2021 | Vorige pagina | Volgende pagina
Kies uw taal
Juridische kwesties
De fabrikant is exclusief verantwoordelijk voor de inhoud, prijs en artikeldetails van de producten en aanbiedingen in de catalogi. Technische en optische wijzigingen door de fabrikant en fouten voorbehouden.
Aanvraagformulier voor speciale producten
De ToolTeam® Inkoopservice
Bent u op zoek naar producten die wel in de catalogus staan maar niet direct online te koop zijn?Onze aankoopdienst zal u graag een niet-bindend en individueel aanbod doen.