Kukko puller guide Pagina 11
Commercieel klantenaanbod**Beste verkopers van Kukko
excl. verzending
excl. verzending
excl. verzending
excl. verzending
excl. verzending
excl. verzending
excl. verzending
excl. verzending
excl. verzending
excl. verzending
excl. verzending
excl. verzending
excl. verzending
excl. verzending
excl. verzending
excl. verzending
excl. verzending
excl. verzending
excl. verzending
excl. verzending
excl. verzending
excl. verzending
excl. verzending
excl. verzending
excl. verzending
excl. verzending
excl. verzending
excl. verzending
excl. verzending
excl. verzending
excl. verzending
excl. verzending
excl. verzending
excl. verzending
excl. verzending
excl. verzending
excl. verzending
excl. verzending
excl. verzending
excl. verzending
INTERNAL-Pulling INTERNAL-Pulling Mode of operation Selection of the right internal puller type The part to be removed is in a recess! pressure For pulling internal ball bearings, ball bearing outer rings and bushings. The bearings are securely grasped by the internal puller, in the inner ring, and quickly removed using the clamping effect. In order to be able to remove a bearing with an internal puller, a counter support or a slide hammer from series 22 will always be required. pressure Accessories: Extensions pull Accessories: Thread adapters Many of the KUKKO internal extractors in the 21 series (not 21-E) can be expanded using an extension (series 21-V) for extracting parts set deep inside a bushing. 1st step: What is the interior diameter of the ball bearing ? mm The KUKKO slide hammers can be used in combination with the thread adapters 22-1-AS anywhere where the threaded pin can be screwed directly into the part that needs to be removed. Safety instructions for internal pulling 2nd step: Selection of the internal puller 2 2 Segmented internal extractors for small spaces Needle bearing extractors 5-78 mm 5-200 mm When using a counter stay, ensure that the jaws of the counter stay do not block the part being removed. 9,6-25 mm pressure pull Counter stay Note: the internal extractors must grip firmly underneath the part to be removed. If there is too little space in the bushing below the part to be removed, an internal extractor from series 21-E may be used. The QR codes guide you to more information and usage videos online 3rd step: What is access like? 3 Supporting surface present INTERNAL INTERNAL 2 2- and 3-shell Internal extractors 3 NO supporting surface present slide hammer pressure pull Combinations of internal pullers with counter stays and slide hammers Counter stays and slide hammers can be combined with internal extractors of various sizes. The appropriate thread adapters are delivered with orders for counter stays and slide hammers. See also pages: 22-23 20 www.KUKKO.com an and KO! K Just sc U K e c n experie www.KUKKO.com 21
17 Pagina’s | Geldig tot 12/2020 | Vorige pagina | Volgende pagina
Kies uw taal
Juridische kwesties
De fabrikant is exclusief verantwoordelijk voor de inhoud, prijs en artikeldetails van de producten en aanbiedingen in de catalogi. Technische en optische wijzigingen door de fabrikant en fouten voorbehouden.
Aanvraagformulier voor speciale producten
De ToolTeam® Inkoopservice
Bent u op zoek naar producten die wel in de catalogus staan maar niet direct online te koop zijn?Onze aankoopdienst zal u graag een niet-bindend en individueel aanbod doen.
