AMF Catalogue ZERO-POINT SYSTEMS Pagina 67
Commercieel klantenaanbod**Beste verkopers van AMF Spannsysteme
excl. verzending
excl. verzending
excl. verzending
excl. verzending
excl. verzending
excl. verzending
excl. verzending
excl. verzending
excl. verzending
excl. verzending
excl. verzending
excl. verzending
excl. verzending
excl. verzending
excl. verzending
excl. verzending
excl. verzending
excl. verzending
excl. verzending
excl. verzending
excl. verzending
excl. verzending
excl. verzending
excl. verzending
excl. verzending
excl. verzending
excl. verzending
excl. verzending
excl. verzending
excl. verzending
excl. verzending
excl. verzending
excl. verzending
excl. verzending
excl. verzending
excl. verzending
excl. verzending
excl. verzending
Clamping module, mechanical, with indexing No. 6208IM Clamping module, mechanical, with indexing Mechanical opening and closing. Tempered steel, plasma-nitrided and burnished. Repetition accuracy < 0.01 mm. Order no. Size Pull-in/locking force up to Holding force* Tightening torque Weight [kN] [kN] [Nm] [g] 559680 BM10 6 17 30 1031 562355 BM20 10 43 30 3295 Application: Mechanical zero point clamping system with indexing grooves offset by 90° for time-optimised clamping during cutting and non-cutting machining. Especially suitable for the modular design of clamping solutions via zero point clamping system. Note: The mechanical assembly clamping module with indexing notches offset by 90° has high holding, pull-in and locking forces. The clamping module can be positioned on the machine table and fastened with standard clamping elements at the circumferential clamping rim. The positioning bore for stop sleeves and a through-hole for fastening onto grid plates with countersunk head screws are present underneath (observe the max. permitted screw force). The mounting bore for the 20 pull-stud is also in the module. Pull-stud: The zero point, timing or undersize pull-stud (without colour coding) can be used, depending on the application. The BM10 clamping module can only be used with the size 10 pullstuds in the M8 version, BM20 only with the size 20 pull-studs in the M12 version. A cylinder pin, as well as fastening bolts for use with the support elements (6210S) or for use on a fixture, are supplied as standard. This clamping module can be used at ambient temperatures of up to 200°C. * Please observe the installation instructions. Dimensions: Order no. CAD Size dia. dia. dia. D1 B1 D 0/+0,01 dia. D2 F7 dia. DN E1 H ±0.01 H1 H2 H3 559680 BM10 9,0 78 15 - 22 4,5 32 22,0 562355 BM20 13,5 112 25 16 32 10,0 50 35,5 20 11 - - K F6 L R S1 SW 8 93 50 8 132 80 5,5 13 - 10 Subject to technical alterations. ANDREAS MAIER GmbH & Co. kg ∙ Phone: +49 711 5766-196 ∙ Web: www.amf.de ZERO-POINT-SYSTEMS 67
228 Pagina’s | Geldig tot 12/2025 | Vorige pagina | Volgende pagina
Kies uw taal
Juridische kwesties
De fabrikant is exclusief verantwoordelijk voor de inhoud, prijs en artikeldetails van de producten en aanbiedingen in de catalogi. Technische en optische wijzigingen door de fabrikant en fouten voorbehouden.
Aanvraagformulier voor speciale producten
De ToolTeam® Inkoopservice
Bent u op zoek naar producten die wel in de catalogus staan maar niet direct online te koop zijn?Onze aankoopdienst zal u graag een niet-bindend en individueel aanbod doen.
