vigor V2480 V2481 Betriebsanleitung Wagenheber Pagina 14
Commercieel klantenaanbod**Beste verkopers van Vigor
excl. verzending
excl. verzending
excl. verzending
excl. verzending
excl. verzending
excl. verzending
excl. verzending
excl. verzending
excl. verzending
excl. verzending
excl. verzending
excl. verzending
excl. verzending
excl. verzending
excl. verzending
excl. verzending
excl. verzending
excl. verzending
excl. verzending
excl. verzending
excl. verzending
excl. verzending
excl. verzending
excl. verzending
excl. verzending
excl. verzending
excl. verzending
excl. verzending
excl. verzending
excl. verzending
excl. verzending
excl. verzending
excl. verzending
excl. verzending
excl. verzending
excl. verzending
excl. verzending
excl. verzending
excl. verzending
excl. verzending
6. Faults If faults occur, check the following: • Jack will not raise. – The drain valve is not sufficiently closed. Close the valve. – The jack is overloaded. – Reduce the load or use a jack with a higher load capacity. • Jack will not raise properly; it cannot reach its maximum height. – There is air in the system. Lower the hydraulic arm, place the jack on its side and remove the oil filler screw to bleed the air out of the system. Replace the oil filler screw, ensuring that it has been tightly screwed in. – The oil pressure is too low. Refill the oil. Express or implied warranty Improper use of the tool invalidates any express or implied warranty. Improper use of the tool includes: • Changing, modifying or repairing the tool with parts that are not ViGOR equipment. • Misusing or improperly handling the tool, disregarding or deviating from the normal procedures or the instructions and specifications for ViGOR equipment. • Using the tool in combination with other products, tools, components or systems that are either faulty, are determined to be the cause of a fault or are not intended for use with this product. Product description: Service jack Type designation: VIGOR V 2480; V 2481 The product described here meets the provisions of EU Directive 2006/42/EC and DIN EN 1494. Date: 28 .10. 2011 Hermann J. ZERVER ViGOR GmbH • Am Langen Siepen 13 – 1415 • D-42857 Remscheid, Germany 14
16 Pagina’s | Geldig tot 12/2022 | Vorige pagina | Volgende pagina
Kies uw taal
Juridische kwesties
De fabrikant is exclusief verantwoordelijk voor de inhoud, prijs en artikeldetails van de producten en aanbiedingen in de catalogi. Technische en optische wijzigingen door de fabrikant en fouten voorbehouden.
Aanvraagformulier voor speciale producten
De ToolTeam® Inkoopservice
Bent u op zoek naar producten die wel in de catalogus staan maar niet direct online te koop zijn?Onze aankoopdienst zal u graag een niet-bindend en individueel aanbod doen.
