PRESSOL Catalogue Garage Technology Pagina 102
Commercieel klantenaanbod**Producten uit de cataloguspagina
excl. verzending
excl. verzending
excl. verzending
excl. verzending
excl. verzending
excl. verzending
excl. verzending
excl. verzending
excl. verzending
excl. verzending
excl. verzending
excl. verzending
excl. verzending
excl. verzending
excl. verzending
WASTE OIL DISPOSAL Waste Oil Suction Systems TECHNICAL DATA • • • • • Compressed air connection: G 1/4'' female Discharge: via pneumatic pump 5:1 Connection suction hose: hydraulic coupling, size 4, G 3/4'' female Connection discharge side: G 3/4'' male Media: for waste oils of hazard class A III of known origin with flash points higher than 55°C, or not easily inflammable liquids; not suitable for highly inflammable liquids SPECIFICATION • Stationary, for drainage of waste oil drainers (27 035), (27 035 890) or (19 857) • For direct discharge to a waste oil collecting tank via pipe line • Suction hose, 2 m, with inline filters and hydraulic coupling, size 4, G 3/4'' female (19 770) • Pneumatic oil pump 5:1 (19 385) • Wall mounting bracket (19 521) • Complete with accessories for assembly • Female quick release connector, size 4, G 3/4'' (19 774) • Suitable for garage service pit drainage trays 19 800 SPECIAL NOTES • Waste oil must not be stored in working areas. It is recommended, acc. to German govt. specifications, to install an overflow protection valve if waste oil discharge shall be effected by using a fixed pipework installation. Adhere to regional regulations and guidelines in any case. PRODUCTS Image Item number Description 1 Description 2 19 800 Waste oil suction system-stationary PNP 5:1-suction hose-2 m 19 902 Installation set For waste oil-pipe-G 3/4'' male 19 903 Drip tray for oil With discharge tap 27 966 Installation set for waste oil tank Connector-size 4-G 3/4'' female ACCESSORIES Abbreviations G Whitworth Pipe Thread, cylindrical, ISO 228 (DIN 259) NW O open PNP Pneumatic pump SAR Hose reel WB Wall and floor mounting WHG Water Resources Act (Germany) 102 Nominal width = inside diameter
285 Pagina’s | Geldig tot 12/2023 | Vorige pagina | Volgende pagina
Kies uw taal
Juridische kwesties
De fabrikant is exclusief verantwoordelijk voor de inhoud, prijs en artikeldetails van de producten en aanbiedingen in de catalogi. Technische en optische wijzigingen door de fabrikant en fouten voorbehouden.
Aanvraagformulier voor speciale producten
De ToolTeam® Inkoopservice
Bent u op zoek naar producten die wel in de catalogus staan maar niet direct online te koop zijn?Onze aankoopdienst zal u graag een niet-bindend en individueel aanbod doen.
