Pneumax - Process Automation Pagina 102
Commercieel klantenaanbod**Beste verkopers van Pneumax GmbH
excl. verzending
excl. verzending
excl. verzending
excl. verzending
excl. verzending
excl. verzending
excl. verzending
excl. verzending
excl. verzending
excl. verzending
excl. verzending
excl. verzending
excl. verzending
excl. verzending
excl. verzending
excl. verzending
excl. verzending
excl. verzending
excl. verzending
excl. verzending
excl. verzending
excl. verzending
excl. verzending
excl. verzending
excl. verzending
excl. verzending
excl. verzending
excl. verzending
Process automation technology Catalogue S.V. 1/2” NPT - For safe area with IP66 stainless steel housing Series Steel line Solenoid valves 1/2” NPT series Steel line - For safe area with IP66 stainless steel housing Stainless steel solenoid valves, complete with IP66 rated solenoid coil in a stainless steel housing and marked have been engineered and developed to meet process automation and Oil & Gas severe service requirements, where material performances, product reliability and health and safety issues are critical elements. As a result, Pneumax products are perfectly suitable to work with sweet gas media and corrosive / aggressive gases. PROCESS AUTOMATION TECHNOLOGY All external and internal parts are AISI 316L stainless steel material in compliance with NACE standard MR0175/ISO 15156-1. The range includes solenoid valves with 3 and 5 ways functions, complete with self feeding solenoids, designed according to the following configuration: solenoid-spring valve, solenoid-solenoid valve, solenoid valve with self-locking manual reset (only in a 3 way function), solenoid valve with self-locking manual reset inverted (only in a 3 way function). Pneumax solenoid valves have 1/2” NPT connections with 3500 Nl/min maximum flow rate. This version only provides single mounting. Construction characteristics Body AISI 316L stainless steel Operators AISI 316L stainless steel Spool AISI 316L stainless steel Spring AISI 316 stainless steel Screws AISI 316 stainless steel (A4-70 stainless steel) Seals NBR for low temperatures FPM (Fluoroelastomer) (available on request) Operating range Fluid Filtered air. No lubrication needed, if applied it shall be continuous. Inert Gas. Sweet gas (natural). Operating temperature -20°C ... +70°C Note: The suitable operating temperature is limited by the most restrictive component, which is the pilot, regardless of the type of seals used in the valve spool. 10 bar Maximum operating pressure Electrical (Electropilot) construction characteristics Housing 304 stainless steel with epoxy paint Armour / Cores Ferromagnetic stainless steel Springs Stainless steel Seals FPM (Fluoroelastomer) Incorporation PBT 30% glass load Wire insulation H Nominal voltage 24 V DC 24, 110, 220 V AC Power consumption DC 2,4W Power consumption AC 10VA (Inrush), 5VA (Running) Connection for cable entry M20x1.5 (1/2” NPT available on request) Electrical connection Screw terminals 2 Poles 2.5 mm IP Rating IP66 Tolerance on voltage supply ±10% ED continuous service 100% Certifications available: Non ATEX marked product : Suitable up to SIL 3 100 Overall dimensions and technical information are provided solely for informative purposes and may be modified without notice
164 Pagina’s | Geldig tot 06/2025 | Vorige pagina | Volgende pagina
Kies uw taal
Juridische kwesties
De fabrikant is exclusief verantwoordelijk voor de inhoud, prijs en artikeldetails van de producten en aanbiedingen in de catalogi. Technische en optische wijzigingen door de fabrikant en fouten voorbehouden.
Aanvraagformulier voor speciale producten
De ToolTeam® Inkoopservice
Bent u op zoek naar producten die wel in de catalogus staan maar niet direct online te koop zijn?Onze aankoopdienst zal u graag een niet-bindend en individueel aanbod doen.
