KIPP Clamping Tools Pagina 228
Commercieel klantenaanbod**Beste verkopers van KIPP
Technical information for machinable collet systems The clamping system for prototypes, samples and small to medium production series. The machinable collet system consists of a base element with a flange plate and the machinable collet. To clamp a wide variety of workpieces only the collet needs to be exchanged, the base element with flange plate remain the same. Standard aluminium collet blanks are used for clamping workpieces. The contour of the workpiece to be clamped is machined into this collet blank. Both external and internal contours can be clamped with the machinable collet system. Different collets for internal and external clamping are available for this purpose. The integrated spring package generates a clamping force of 5.8 kN. The clamping force can be raised to 43.5 kN by pneumatic post-clamping. Machinable collets for workpieces that couldn‘t otherwise be clamped • whether geometrical or free-form: you have full control of the most difficult workpiece contours • can be set up on grid plates, T-slot plates and your own fixtures • clamping range of 25 - 140 mm and workpiece weights up to 25 kg • clamps rough parts, machined parts, round and irregular-shaped parts • low clamping depth of 1 mm can be achieved • designed for external and internal clamping • repeat accuracy of < 0.01 mm Machinable collet clamping and holding force spring release pressure spring clamping force spring retaining force post-clamping pressure post-clamping force post-clamping retaining force 6 bar 5.81 kN 2.8 kN 6 bar 13.39 kN 10.39 kN 6 bar 5.81 kN 2.8 kN 12 bar 20.93 kN 17.93 kN 6 bar 5.81 kN 2.8 kN 30 bar 43.55 kN 40.55 kN Machinable collet - system construction pos. 1 2 3 4 5 6 description collet flange plate piston spring package screw / tension cone base element P1 P2 Release collet with compressed air pistol connection Post-clamp with compressed air pistol connection piece 1 1 1 8 2 1 1 5 1 4 2 3 P2 P1 6 229
466 Pagina’s | Geldig tot 12/2022 | Vorige pagina | Volgende pagina
Kies uw taal
Juridische kwesties
De fabrikant is exclusief verantwoordelijk voor de inhoud, prijs en artikeldetails van de producten en aanbiedingen in de catalogi. Technische en optische wijzigingen door de fabrikant en fouten voorbehouden.
Aanvraagformulier voor speciale producten
De ToolTeam® Inkoopservice
Bent u op zoek naar producten die wel in de catalogus staan maar niet direct online te koop zijn?Onze aankoopdienst zal u graag een niet-bindend en individueel aanbod doen.