Högert Katalog Arbeitsschutzausrüstung Pagina 168
Commercieel klantenaanbod**Beste verkopers van Högert Technik
Regulation (EU) 2016/425 of the European Parliament and of the Council of 9 March 2016 on personal protective equipment and repealing Council Directive 89/686/EEC EN STANDARDS STANDARDS HAZARD CATEGORIES WITH REGARD TO THE PPE CATEGORY I – This category includes only minimal hazards such as: surface mechanical injuries; contact with detergents with weaker effects or prolonged contact with water; contact with hot surfaces with temperature not exceeding 50 ° C; eye damage due to exposure to sunlight (other than during observation the sun); atmospheric factors. CATEGORY II – This category includes hazards that are not classified in category I (low risk) or category III (high risks). CATEGORY III – This category includes only hazards that can have very serious consequences, such as death or irreparable damage to health related to: substances and mixtures hazardous to health; dangerous for health of substances and mixtures; harmful biological agents; ionizing radiation; environment high temperature, the effects of which are comparable to that of air having a temperature of at least 100°C; low temperature environment, the effects of which are comparable to the action of air at a temperature of -50°C or lower; falling from a height; electric shock and work under voltage; drowning; cuttings by portable chainsaw; high pressur; gunshot wounds or knife stabs; harmful noise. EYE PROTECTION Filter type 2 2C lub 3 Against radiation protection ultraviolet (UV) filter ultraviolet (UV) protection filter good color recognition 4 infrared (IR) filter 5 filter protecting against glare (sunscreen) without any requirements related to IR 6 Optical class: filter protecting against glare (sun visor) with requirements related to IR 1 for continuous use 2 for occasional use 3 for short-term use Degree of blackout Coefficient of transmitting light 1.2 100 – 74.4% 1.4 74.4 – 58.1% 1.7 58.1% – 43.2% 2.0 43.2% – 29.1% 2.5 29.1% – 17.8% 3.1 17.8 – 8.0% 4.1 8.0 – 3.0% ... Symbols of mechanical resistance 16 S increased impact energy – impact resistance with a steel ball with a nominal diameter of 22 mm, weighting 43 g at a speed of 5.1 m / s F low impact energy – impact resistance with a steel ball with a nominal diameter of 6 mm, weighting 0,86 g at a speed of 45 m / s B mean impact energy – impact resistance with a steel ball with a nominal diameter of 6 mm, weighting 0,86 g at a speed of 120 m / s A 166 high impact energy – impact resistance with a steel ball with a nominal diameter of 6 mm, weighting 0,86 g at a speed of 190 m / s (used for face shields). 0.000061 – 0.000023% Symbols of additional protective features: K resistance to surface damage by fine particles of dust N resistance to fogging (misting) R increased light reflection factor T protection against particles at extreme temperatures. Guaranteed resistance between -50C – 550C
212 Pagina’s | Geldig tot 06/2022 | Vorige pagina | Volgende pagina
Kies uw taal
Juridische kwesties
De fabrikant is exclusief verantwoordelijk voor de inhoud, prijs en artikeldetails van de producten en aanbiedingen in de catalogi. Technische en optische wijzigingen door de fabrikant en fouten voorbehouden.
Aanvraagformulier voor speciale producten
De ToolTeam® Inkoopservice
Bent u op zoek naar producten die wel in de catalogus staan maar niet direct online te koop zijn?Onze aankoopdienst zal u graag een niet-bindend en individueel aanbod doen.