HEWI Catalog Sanitary Pagina 518
Commercieel klantenaanbod**Beste verkopers van HEWI
excl. verzending
excl. verzending
excl. verzending
excl. verzending
excl. verzending
excl. verzending
excl. verzending
excl. verzending
excl. verzending
excl. verzending
excl. verzending
excl. verzending
excl. verzending
excl. verzending
excl. verzending
excl. verzending
excl. verzending
excl. verzending
excl. verzending
excl. verzending
excl. verzending
excl. verzending
excl. verzending
excl. verzending
excl. verzending
excl. verzending
excl. verzending
excl. verzending
excl. verzending
excl. verzending
excl. verzending
excl. verzending
excl. verzending
excl. verzending
excl. verzending
excl. verzending
excl. verzending
excl. verzending
excl. verzending
excl. verzending
Washbasins | variable length POSSIBLE INSTALLATION SITUATIONS | ORDERING INSTRUCTIONS Freely on the wall washbasin width W1 W2 hanger bolt fixing 140 340 / 475 140 1. Measure the precise dimensions of the wall at the installation height of the washbasin after the wall surface has been finished. 2. Check the wall for unevenness. 3. Define the side washbasin projections W1 and W2 Attention: minimum dimension W1/W2 = 425 mm, maximum dimension W1/W2 = 1400 mm. One-sided on the wall washbasin width minimum 3 W1 W2 hanger bolt fixing 140 340 / 475 140 1. Measure the precise dimensions of the wall at the installation height of the washbasin after the wall surface has been finished. 2. Check the wall for unevenness. 3. Check whether the solid angle is 90°. 4. Define the side washbasin projections W1 and W2 Attention: minimum dimension W1/W2 = 425 mm, maximum dimension W1/W2 = 1400 mm. Please note that a silicone joint at the side of at least 3 mm will be required. silicone joint minimum 3 mm Niche niche width washbasin width minimum 3 W1 W2 minimum 3 hanger bolt fixing 140 340 / 475 140 silicone joint minimum 3 mm left and right 514 | HEWI Sanitary 1. Measure the precise dimensions of the niche at the installation height of the washbasin after the wall surface has been finished. 2. Check the wall for unevenness. 3. Check whether the niche angles are each 90°. 4. Define the side washbasin projections W1 and W2 Attention: minimum dimension W1/W2 = 425 mm, maximum dimension W1/W2 = 1400 mm. Please note that a silicone joint of at least 3 mm will be required on each side.
784 Pagina’s | Geldig tot 12/2024 | Vorige pagina | Volgende pagina
Kies uw taal
Juridische kwesties
De fabrikant is exclusief verantwoordelijk voor de inhoud, prijs en artikeldetails van de producten en aanbiedingen in de catalogi. Technische en optische wijzigingen door de fabrikant en fouten voorbehouden.
Aanvraagformulier voor speciale producten
De ToolTeam® Inkoopservice
Bent u op zoek naar producten die wel in de catalogus staan maar niet direct online te koop zijn?Onze aankoopdienst zal u graag een niet-bindend en individueel aanbod doen.
