Dynabrade - Industrial Katalog Pagina 312
Commercieel klantenaanbod**Producten uit de cataloguspagina
excl. verzending
excl. verzending
excl. verzending
excl. verzending
excl. verzending
excl. verzending
excl. verzending
excl. verzending
excl. verzending
excl. verzending
excl. verzending
excl. verzending
excl. verzending
excl. verzending
excl. verzending
excl. verzending
excl. verzending
excl. verzending
excl. verzending
excl. verzending
excl. verzending
excl. verzending
excl. verzending
excl. verzending
excl. verzending
excl. verzending
excl. verzending
excl. verzending
excl. verzending
excl. verzending
excl. verzending
excl. verzending
excl. verzending
excl. verzending
Performance Assurance Air Tool and Air System Inspection/Diagnosis Air Tool Inspection Inspect the air tool. Has the motor been oiled? This silencer shows evidence of oil. Is the tool’s air inlet clean? This air motor received “Last-Rites Oil.” Notice, the puddle of oil appears clean. Can the tool’s spindle be turned by hand? PRODUCT & SAFETY INFORMATION Is the tool’s exhaust (muffler/silencer) clean? “The spindle won’t turn.” This usually indicates broken vanes. Generally, broken vanes indicate that the motor has not been oiled regularly. Air System Check Tachometer q Affix a 1/2" (12 mm) square piece of reflective tape to the Condition of Air Hose (Continued) q How many coupler connections exist from the drop to the workbench? tool’s spindle or pad. q Aim the Laser Pointer at the reflective tape and run the tool. (Operational distance: 2"/50 mm to 20"/500 mm) q Read RPM. (Notice: Refer to User’s Manual for more detailed instructions.) q q Are there any “T’s” or a manifold at the workbench? How can Dynaswivel® prolong the life of the hose? PSI Gauge q Connect Air Gauge and air supply hose to the air inlet of the tool. q Run the tool and adjust air supply pressure to 90 PSIG (6.2 Bar). Filter-Regulator-Lubricator q FRL – is it present? If yes, is it working? q Filled with oil? Set for proper lubrication? q What type of oil? (Weight, Non-detergent vs. Detergent – Notice: Condition of Coupler and Plug q Check for wear or damage to coupler and/or plug. q Can the I.D. of the plug supply enough air to the tool? q Condition of Air Hose q Check to see if the hose is frayed or cracked? Are there reducer bushings being used to connect the air supply to the FRL? q What size is the fitting connecting the FRL to the air line that is supplying the air to the workbench? q q Are there any “T’s” or manifolds coming directly off the FRL? Non-detergent oils contain little to no solvents. Air Tool Oils with “conditioner” usually contain solvents. Example: Both Marvel® Air Tool Oil and Marvel® Mystery Oil contain mineral spirits, a common solvent used as paint thinner.) (see “Cost of an Air Hose Leak” on reverse side) q q q What is the length of the hose? Match length and I.D. of hose to air requirement of tool. Is there a hose reel? 312 What material is the pipe that is carrying the air supply? Black Iron?
316 Pagina’s | Geldig tot 07/2026 | Vorige pagina | Volgende pagina
Kies uw taal
Juridische kwesties
De fabrikant is exclusief verantwoordelijk voor de inhoud, prijs en artikeldetails van de producten en aanbiedingen in de catalogi. Technische en optische wijzigingen door de fabrikant en fouten voorbehouden.
Aanvraagformulier voor speciale producten
De ToolTeam® Inkoopservice
Bent u op zoek naar producten die wel in de catalogus staan maar niet direct online te koop zijn?Onze aankoopdienst zal u graag een niet-bindend en individueel aanbod doen.