Dynabrade - Abrasives Katalog Pagina 132
Commercieel klantenaanbod**Producten uit de cataloguspagina
excl. verzending
excl. verzending
excl. verzending
excl. verzending
excl. verzending
excl. verzending
excl. verzending
BONDED ABRASIVES DYNACUTTM BONDED ABRASIVES MOUNTED POINTS DYNACUTTM COTTON FIBER ALUMINUM OXIDE RESIN BOND The GOOD choice for blending and polishing. F E AT U R E S 5 1 BENEFITS Features a compressed cotton fiber abrasive grain and bond matrix Can deburr and finish in one step. Control metal removal & deliver smooth chatter free operation while generating superior finishes on stainless steel and aluminum. Additionally, these burrs resist loading on softer materials like aluminum and brass. DYNACUTTM COTTON FIBER Shape Size (D x T) B52 3/8" x 3/4" W164 1/4" x 3/4" Spindle Dia. Max. RPM 45,370 1/8" 45,900 47,880 W176 3/8" x 1-1/2" W185 1/2" x 1/2" 1/4" 44,470 Shape Size (D x T) Spindle Dia. Max. RPM B52 3/8" x 3/4" W164 1/4" x 3/4" W176 3/8" x 1-1/2" W185 1/2" x 1/2" Type Type 45,900 47,880 1/4" Pkg. Qty 78535 10 78775 10 78776 10 78777 10 Item # Pkg. Qty 78778 10 78779 10 78780 10 78781 10 Type KEY MS-Fine Deburring MH-Polishing MS 45,370 1/8" Item # MH 44,470 NOTE: MAXIMUM RPM AND OVERHANG MEASUREMENT GUIDE The maximum RPM for spindle mounted points is valid up to a maximum overhang of 1/2" OVERHANG: the distance between the grinder collet/chuck and the abrasive on the spindle. The larger the overhang, the lower the maximum safe operating speed. See package insert for other overhangs. 1/2" OVERHANG TECH TIPS For best mounted point performance, run the mounted point at the maximum allowable speed according to ANSI B7.1. Refer to the speed chart in each package for proper operating speeds. “A” shapes are used for medium to heavy blending. “B” shapes are used for light deburring and finishing/polishing. “W” shapes are used for offhand and precision grinding of medium to heavy stock. 36 grit and coarser are best for rough grinding. 60 grit and finer are best for grinding narrow surfaces and for imparting fine finishes. It is the user’s responsibility to refer to and comply with ANSI B7.1 Abrasives Catalog 129
149 Pagina’s | Geldig tot 07/2026 | Vorige pagina | Volgende pagina
Kies uw taal
Juridische kwesties
De fabrikant is exclusief verantwoordelijk voor de inhoud, prijs en artikeldetails van de producten en aanbiedingen in de catalogi. Technische en optische wijzigingen door de fabrikant en fouten voorbehouden.
Aanvraagformulier voor speciale producten
De ToolTeam® Inkoopservice
Bent u op zoek naar producten die wel in de catalogus staan maar niet direct online te koop zijn?Onze aankoopdienst zal u graag een niet-bindend en individueel aanbod doen.