AMF Catalogue ZERO-POINT SYSTEMS Pagina 92
Commercieel klantenaanbod**Beste verkopers van AMF Spannsysteme
excl. verzending
excl. verzending
excl. verzending
excl. verzending
excl. verzending
excl. verzending
excl. verzending
excl. verzending
excl. verzending
excl. verzending
excl. verzending
excl. verzending
excl. verzending
excl. verzending
excl. verzending
excl. verzending
excl. verzending
excl. verzending
excl. verzending
excl. verzending
excl. verzending
excl. verzending
excl. verzending
excl. verzending
excl. verzending
excl. verzending
excl. verzending
excl. verzending
excl. verzending
excl. verzending
excl. verzending
excl. verzending
excl. verzending
excl. verzending
excl. verzending
excl. verzending
excl. verzending
excl. verzending
intermediate element No. 6210Z Intermediate element Tempered steel, plasma-nitrided and burnished. Order no. 534487 Size H ±0.01 Weight B10 20 667 [g] 559683 B10 28 1000 534503 B10 30 1012 534529 B10 40 1353 534545 B10 50 1698 534560 B10 60 2043 534586 B10 80 2731 534602 B10 100 3443 534628 B20 20 1394 534644 B20 30 2092 534669 B20 40 2800 534685 B20 50 3508 534701 B20 60 4225 534727 B20 80 5661 534743 B20 100 7012 Application: The intermediate elements are used as height adapters for workpieces and clamping fixtures, and are mounted to the main elements. Workpieces are clamped by means of assembly elements. This clamping system can be used to move workpieces to the required machining height in the machine for 5-sided machining, or for the safe and quick clamping of workpieces with ledges and different clamping heights on the machine table. height 20, 28 and 30 mm Advantage: Simple, quick and flexible clamping of complex workpiece contours on the machine table. Especially suitable for levelling workpieces or clamping fixtures at the necessary machine heights in the machine tool and for the reliable clamping of same. Note: For the adaptation to zero point clamping modules, with the exception of the installation heights H20, 28 and 30, the mounting bore for the pull-studs, corresponding to sizes 10 and 20, is already made in the intermediate element. If two or more intermediate elements are used, they can be axially aligned and then bolted using centring sleeves. The fastening bolts are supplied as standard. When fastening to AMF grid plates, pay attention to bolt lengths! Order numbers on the centring sleeves: - size 10: Order no. 535732 - size 20: Order no. 78006 workpiece from height 40 mm Dimensions: Order no. CAD Size dia. B1 dia. D dia. D1 dia. D2 0/+0,01 F7 Cylinder screw ISO 4762 E1 E2 G R S1 534487 B10 9 78 - 15 M8x30 5,0 13,0 M8 50 - 559683 B10 9 78 - 15 M8x30 5,0 13,0 M8 50 - 534503 B10 9 78 - 15 M8x30 5,0 13,0 M8 50 - 534529 B10 9 78 15 15 M8x30 5,0 13,0 M8 50 3,5 534545 B10 9 78 15 15 M8x45 5,0 13,0 M8 50 3,5 534560 B10 9 78 15 15 M8x50 5,0 13,0 M8 50 3,5 534586 B10 9 78 15 15 M8x50 5,0 13,0 M8 50 3,5 534602 B10 9 78 15 15 M8x50 5,0 13,0 M8 50 3,5 534628 B20 13 112 - 16 M12x25 9,0 9,0 M12 80 - 534644 B20 13 112 - 16 M12x25 11,5 11,25 M12 80 - 534669 B20 13 112 25 16 M12x25 11,5 11,25 M12 80 5,5 534685 B20 13 112 25 16 M12x55 11,5 11,25 M12 80 5,5 534701 B20 13 112 25 16 M12x55 11,5 11,25 M12 80 5,5 534727 B20 13 112 25 16 M12x55 11,5 11,25 M12 80 5,5 534743 B20 13 112 25 16 M12x55 11,5 11,25 M12 80 5,5 Subject to technical alterations. 92 ZERO-POINT-SYSTEMS ANDREAS MAIER GmbH & Co. KG ∙ Phone: +49 711 5766-196 ∙ Web: www.amf.de
228 Pagina’s | Geldig tot 12/2025 | Vorige pagina | Volgende pagina
Kies uw taal
Juridische kwesties
De fabrikant is exclusief verantwoordelijk voor de inhoud, prijs en artikeldetails van de producten en aanbiedingen in de catalogi. Technische en optische wijzigingen door de fabrikant en fouten voorbehouden.
Aanvraagformulier voor speciale producten
De ToolTeam® Inkoopservice
Bent u op zoek naar producten die wel in de catalogus staan maar niet direct online te koop zijn?Onze aankoopdienst zal u graag een niet-bindend en individueel aanbod doen.