Chipboard screws with countersunk head, TX inner star
(393)Chipboard screws with countersunk head and TX inner star drive are designed for joining wood-based materials such as chipboard. In the Fischer assortment, you will find these screws in various lengths and with partial or full thread.
What are chipboard screws with countersunk head suitable for?
These screws are specifically developed for fastening into chipboard and other wood-based materials. The countersunk head allows for a flush recess into the surface, which is often desired in furniture making and interior construction. The TX inner star drive provides good grip for the screw and reduces the risk of slipping.
What are the differences in thread length?
Chipboard screws are offered with partial thread (TG) or full thread (VG). Partial thread screws have a smooth shank area that holds the screw in the upper layer, while the thread anchors in the lower layer. Full thread screws are threaded over the entire length and are suitable for other fastening situations. The choice depends on the thickness of the boards and the desired holding power.
How do I choose the right length?
The length of the screw should match the thickness of the boards to be joined. As a general rule: the screw should completely penetrate the lower board without splitting the upper board. Shorter screws are needed for thin boards, and longer ones for thicker boards. Various lengths are available in the assortment to meet different requirements.





