GEDORE Automotive KLANN Main catalog General Repairs Pagina 496
Offerta per clienti commerciali**Prodotti della pagina del catalogo
escluse le spese di spedizione
escluse le spese di spedizione
escluse le spese di spedizione
escluse le spese di spedizione
escluse le spese di spedizione
escluse le spese di spedizione
Car Body and Interior KL-0570-20 Special Torx® Socket T80 (with bore) KL-0570-20 Suitable for BMW E31, E38 and E39. Necessary for the removal and installation of windscreen wiper arms. It can also be used for adjusting the contact pressure, for example, when replacing the windscreen. This special Torx® socket is hollow-drilled on the inside to retain the wiper arm bearing shaft. Technical Data: Drive: 1/2" ® = reg. trademark of Acument Intellectual Properties, LLC. USA KL-0049-300 Slide Hammer Puller, 4.8kg (Base Tool) KL-0049-300 The ideal tool for extracting stuck or tight-fitting components such as half-shafts, universally jointed drive shafts, injector nozzles etc. It is used in conjunction with the respective adaptors and puller bolts. Scope of Delivery: KL-0049-300 Slide Hammer Puller, 4.8 kg (Base Tool) Part No. KL-0049-3001 KL-0049-3002 KL-0049-3003 KL-0049-3004 Description Pull Rod for KL-0049-3 Hammer Weight, 4.8kg, for KL-0049-3 Handle for KL-0049-3 Hex Nut, M18 Qty 1 1 1 1 KL-0049-3020 Hook KL-0049-3020 Used in conjunction with the slide hammer puller KL-0049-31 for pulling chassis parts. KL-0049-350 Clip with Hook and Joint KL-0049-350 Scope of Delivery: KL-0049-350 Clip with Hook and Joint Part No. KL-0049-3500 KL-0049-3501 KL-0049-3502 Description Clip Hook Joint M18 Qty 1 1 1 KL-0270-31 C Designed to pull car body panels. Used in conjunction the slide hammer puller KL-0049-31 or KL-0049-300. The forged clip KL-0049-3500 has an automatic self stress on the cone. Its field of application is a pulling force of up to 20t. The forged hook KL-0049-3501 made of hardened and tempered steel is suitable to any chain end of any make. When the chain is moved or remounted, it does not twist but it runs back parallel to itself. The clip KL-0049-3500 is connected to slide hammer puller KL-0049-31 or KL-0049-300 by means of the hook KL-0049-3501 and joint KL-0049-3502. KL-0270-31 C Bit Wrench, Angled, (Reinforced Design), with 8 Bit Inserts Suitable for Mercedes Toe Adjustment, e.g. on 190 Series (W201), C-Class (W202), C-Class (W203), 200-300 E (W124), E-Class (W210, W211), S-Class (W220). The KL-0270-31 C wrench is the ideal tool for setting the toe at the rear axle. Due to its special shape, this tool allows the user to easily and accurately turn the adjusting screw which is particularly hard to access. 9 Technical Data: Lenght: Bit Insert: Bit Insert (height): Bit Drive: Weight: 320mm T30, T40, T45, T50, T55, XZN-8, XZN-10, XZN-12 20mm 5/16" 500g ® = reg. trademark of Acument Intellectual Properties, LLC. USA 9-06 (496) Copyright GEDORE Automotive GmbH, Germany formerly
580 pagine | Valido fino a 12/2025 | Previous page | Pagina successiva
Selezionare la lingua
Questioni legali
Il produttore è esclusivamente responsabile del contenuto, del prezzo e dei dettagli degli articoli dei prodotti e delle offerte presentati nei cataloghi. Con riserva di modifiche tecniche e ottiche da parte del produttore e salvo errori.
Modulo di richiesta per prodotti speciali
Il servizio di acquisto di ToolTeam®
State cercando dei prodotti che sono mostrati nel catalogo ma che non possono essere acquistati direttamente online?Il nostro servizio di approvvigionamento sarà lieto di farvi un’offerta individuale e non vincolante.