GEDORE Automotive KLANN Main catalog General Repairs Pagina 148
Offerta per clienti commerciali**Prodotti della pagina del catalogo
escluse le spese di spedizione
escluse le spese di spedizione
escluse le spese di spedizione
escluse le spese di spedizione
escluse le spese di spedizione
escluse le spese di spedizione
escluse le spese di spedizione
escluse le spese di spedizione
escluse le spese di spedizione
escluse le spese di spedizione
escluse le spese di spedizione
escluse le spese di spedizione
escluse le spese di spedizione
escluse le spese di spedizione
Silentblocs and Bushings KL-0040-2529 KL-0040-2529 Pressure Gauge for KL-0040-2500, with 1/4“ NPT Connection Thread Intended for use with KL-0215-35 and KL-0215-36 etc. The pressure gauge is screw-fitted between the hydraulic pump and hose so as to allow the hydraulic pressure to be monitored during operation. The pressure gauge features an additional tonne scale which is specifically adapted to our hydraulic cylinder KL-0040-2500. Technical Data: Measuring Range: Pressure Gauge Ø: Connection Thread: KL-0039-800 K 1,000bar 71mm 1/4“ NPT KL-0039-800 K Hydraulic Drive Kit The kit is designed to upgrade our mechanical tool sets such as the pulling device for silentbloc KL-0039-413 K, wheel bearing tool set KL-0039-0110 K or puller series KL-0174-.. so as to enable them to be driven by the hydraulic cylinder (17t) KL-0040-2500. Due to its special design as a tubular piston cylinder and thanks to the possibility to be used in conjunction with various spindles, the hydraulic cylinder KL-0040-2500 is suitable for pulling and pushing operations. Even severely seized bearings, bushes or drive shafts can be removed and installed quickly and easily using the 17t drive kit. 4 Scope of Delivery: KL-0039-800 K Hydraulic Drive Kit Part No. KL-0039-1912 KL-0039-1914 KL-0039-1920-1 KL-0040-3009 KL-0039-1920-4 KL-0039-1930 KL-0039-1935 KL-0039-1002 KL-0039-1003 KL-0040-2500 KL-0039-8009 KL-0039-1002 Description Pull Spindle, M12, with Nut Pull Spindle, M14, with Nut Pull Spindle, M20 Clamping Nut Clamping Nut, Ø 38mm Pressure Spindle, M20x350mm, with O-Ring Thrust Piece Retaining Adaptor with O-Rings, for Clamping Nut and Pressure Spindle Retaining Adaptor with O-Rings, for Hydraulic Cylinder Hydraulic Cylinder (17t) Plastic Storage Case Qty 1 1 1 1 1 1 1 1 1 1 1 KL-0039-1002 Retaining Adaptor with O-Rings, for Clamping Nut and Pressure Spindle This adaptor is necessary for retaining the various pressure/support sleeves of the KL-0039-.. and KL-0043-..Series . Retaining Ø for clamping nut or pressure spindle: 20mm KL-0039-1003 KL-0039-1003 Retaining Adaptor with O-Rings, for Hydraulic Cylinder This adaptor is needed to retain the various KL-0039-.. and KL-0043-.. pressure/ support sleeves if these are to be used with the hydraulic cylinder KL-0040-2500. (Connection thread: M42x2) 4-12 (148) Copyright GEDORE Automotive GmbH, Germany formerly
580 pagine | Valido fino a 12/2025 | Previous page | Pagina successiva
Selezionare la lingua
Questioni legali
Il produttore è esclusivamente responsabile del contenuto, del prezzo e dei dettagli degli articoli dei prodotti e delle offerte presentati nei cataloghi. Con riserva di modifiche tecniche e ottiche da parte del produttore e salvo errori.
Modulo di richiesta per prodotti speciali
Il servizio di acquisto di ToolTeam®
State cercando dei prodotti che sono mostrati nel catalogo ma che non possono essere acquistati direttamente online?Il nostro servizio di approvvigionamento sarà lieto di farvi un’offerta individuale e non vincolante.
