GEDORE Automotive KLANN Main catalog General Repairs Pagina 120
Offerta per clienti commerciali**Prodotti della pagina del catalogo
escluse le spese di spedizione
escluse le spese di spedizione
escluse le spese di spedizione
escluse le spese di spedizione
escluse le spese di spedizione
escluse le spese di spedizione
escluse le spese di spedizione
escluse le spese di spedizione
escluse le spese di spedizione
Axle Repairs Wheel Hubs KL-0045-7 Hydraulic Spindle (12t), M42x2 KL-0045-7 The KL-0045-7 is a hydraulic spindle with a maximum allowable force of 120kN (=12t) designed to fit a wide range of GEDORE Automotive tools. Scope of Delivery: KL-0045-7 Hydraulic Spindle (12t), M42x2 Part No. KL-0045-700 KL-0045-7009 KL-0045-7020 Description Hydraulic Spindle (12t, Base Tool), M42x2 Pressure Piece, short Pressure Piece, long Qty 1 1 1 3 KL-0040-2500 The base tool KL-0045-700 consist of a body made of high-grade steel, two internal pistons, cup seals and various screw joints. The spindle is operated via a pressure screw. If the hydraulic spindle KL-0045-7 is combined with tools of the KL-0174-Series, the adaptor KL-0174-552 (2¼"-14 UNS to M42x2) is additionally needed when the perforated puller plates size 2 and size 3 are used. Technical Data: Maximum admissible force: Maximum stroke: Thread of cylinder: Length without ‘T’ Handle: Weight: 120kN (12t) 16mm M42x2 240mm 2.3kg KL-0040-2500 Hydraulic Cylinder, 17t Thanks to its special design as a hollow piston cylinder, the KL-0040-2500 hydraulic cylinder (17t) can be used to perform pulling as well as pushing operations in conjunction with the corresponding spindles available as accessories. Technical Data: Range of Use: In conjunction with various GEDORE Automotive tools, the hydraulic cylinder (17t) KL-0040-2500 can be used for the removal and installation of drive shafts, wheel hubs, wheel bearings, silentblocs and suspension ball joints. Note: A hydraulic pump is needed to drive the hydraulic cylinder KL-0040-2500. For accessories such as coupling, hydraulic pump, pressure gauge etc., please refer to chapter 4 in this Catalogue). KL-0039-1930 Maximum admissible force: Maximum stroke: Maximum oil pressure: Maximum volume of oil: Piston area: Thread in hollow piston: Retaining thread (pushing side): Retaining thread (pulling side): Cylinder external diameter: Cylinder overall length (piston retracted): Cylinder overall length (piston extended): Hydraulic fluid connection thread: Weight: 170kN (17t) 45mm 700bar 122cm³ 27cm² M20 2¼“-14 UNS M42x2 80mm 202mm 247mm 3/8“ NPT 5.2kg KL-0039-1930 Pressure Spindle with O-Ring, M20x350 Technical Data: Pin Ø: Overall length: Maximum load capacity: KL-0039-1935 20mm 350mm 20t KL-0039-1935 Thrust Piece This tool is necessary for pressing out drive shafts. It is used in conjunction with the KL-0174-.. Puller Series, the KL-0040-2500 hydraulic cylinder and the KL-0039-1930 pressure spindle with pin Ø 20mm. KL-0174-856 KL-0174-856 Thrust Piece for Drive Shafts Designed to press out drive shafts. Used in conjunction with the tools of the KL-0174-.. Series and mechanical pressure spindles with a pin Ø of 14mm. 3.4-07 (120) Copyright GEDORE Automotive GmbH, Germany formerly
580 pagine | Valido fino a 12/2025 | Previous page | Pagina successiva
Selezionare la lingua
Questioni legali
Il produttore è esclusivamente responsabile del contenuto, del prezzo e dei dettagli degli articoli dei prodotti e delle offerte presentati nei cataloghi. Con riserva di modifiche tecniche e ottiche da parte del produttore e salvo errori.
Modulo di richiesta per prodotti speciali
Il servizio di acquisto di ToolTeam®
State cercando dei prodotti che sono mostrati nel catalogo ma che non possono essere acquistati direttamente online?Il nostro servizio di approvvigionamento sarà lieto di farvi un’offerta individuale e non vincolante.