Offre client commercial**
ELMAG Préfiltre avec purgeur automatique 12602
UGS: T-497533
323,90 € (incl. Taxe 19%, hors Expédition)
272,18 € (excl. TVA légale, hors Expédition)
346,29 € PDSF
En stock,prêt à être expédié sous 48h
Pièce
donePréfiltre série G
doneFG20, 1980 l/min., FF 1/2’.
doneFG20, 1980 l/min., FF 1/2’.
Pre-filter including automatic drain G20, 1,986 l/min., IT 1/2” - 6|How clean is your compressed air|Filters from MARK keep your compressed air network in perfect shape!|Pre-filter - filter range G|Typical installations|Protect your compressed air installations against:|Compressed air according to ISO 8573-1:2010|By nature, atmospheric air already contains various impurities such as dust, a variety of hydrocarbons and water in the form of humidity. When extracted by the compressor, they are compressed and discharged into the line together with oil particles from the compression process. These dirt particles interact and can form abrasive and corrosive emulsions that can damage downstream equipment. Quality treatment solutions remove these impurities from the compressed air.|At least one filter must be installed in each compressed air network. This improves air quality, which is beneficial for your entire compressed air network, including downstream dryers, air ducts and pneumatic tools. Depending on the application, you may need to filter the air in several stages to prevent saturation of the elements, maintain the air quality and avoid drops in pressure.|Coalescing filters for general protection. Remove solid particles, liquid water and oil aerosol.
Separation efficiency: 99%
In order to achieve an optimum filter effect, a filter of type G should be preceded by a water separator.
Illustration with differential pressure indicator option|A. General protection
(Air purity corresponds to ISO 8573-1: G filter class 3:-:3)
B. General protection and reduced oil concentration
(Air purity corresponds to ISO 8573-1: Class 1:-:2)
C. High-quality compressed air with reduced dew point
(Air purity corresponds to ISO 8573-1: Class 1:4:2)
D. High-quality compressed air with reduced dew point and oil concentration
(Air purity corresponds to ISO 8573-1: Class 1:4:1)
1 Compressor with aftercooler and/or cyclone separator “WS”
2 Pre-filter “G”
3 Fine filter “C”
4 Active carbon filter “V”
5 MDX refrigeration dryer|- Moisture
- Particles
- Oil
- Hydrocarbon
- Viruses
- Bacteria|Depending on the customer’s application, a certain level of air purity is required. These purity requirements have been classified into air purity classes. The purity classes are defined in the ISO 8573-1 standard, 2010 edition. This table defines seven air purity classes from 0 to 6 according to the following rule: the lower the class, the higher the air quality. The enclosures and elements are manufactured with high-quality components in accordance with ISO 12500-1.
Separation efficiency: 99%
In order to achieve an optimum filter effect, a filter of type G should be preceded by a water separator.
Illustration with differential pressure indicator option|A. General protection
(Air purity corresponds to ISO 8573-1: G filter class 3:-:3)
B. General protection and reduced oil concentration
(Air purity corresponds to ISO 8573-1: Class 1:-:2)
C. High-quality compressed air with reduced dew point
(Air purity corresponds to ISO 8573-1: Class 1:4:2)
D. High-quality compressed air with reduced dew point and oil concentration
(Air purity corresponds to ISO 8573-1: Class 1:4:1)
1 Compressor with aftercooler and/or cyclone separator “WS”
2 Pre-filter “G”
3 Fine filter “C”
4 Active carbon filter “V”
5 MDX refrigeration dryer|- Moisture
- Particles
- Oil
- Hydrocarbon
- Viruses
- Bacteria|Depending on the customer’s application, a certain level of air purity is required. These purity requirements have been classified into air purity classes. The purity classes are defined in the ISO 8573-1 standard, 2010 edition. This table defines seven air purity classes from 0 to 6 according to the following rule: the lower the class, the higher the air quality. The enclosures and elements are manufactured with high-quality components in accordance with ISO 12500-1.
Contenu:
1 Pièce
Expédition:
29,90 € Paketversand à France
Livraison:
Fournisseur:
Méthodes de paiements:
Retour:
Sécurité:
Données du produit
Fabricant:
ELMAG
Etat:
Nouveau
UGS:
T-497533
Fabricant UGS:
12602
Code GTIN (EAN):
9004853126024
Poids:
1,00 Kg
Toutes les informations relatives aux produits de ELMAG. Modifications techniques et optiques du fabricant et erreurs réservées.
Cette page a été traduite automatiquement, la version originale en allemand se trouve here, veuillez également noter le Exonérations de responsabilité en matière de traduction.
Description du produit
- Préfiltre Elmag avec purgeur automatique, numéro de fabrication Elmag : 12602
- Préfiltre série G, FG20, 1980 l/min, FI 1/2’
Résultats associés
Catalogues complets
L’offre s’adresse exclusivement aux clients professionnels, entreprises, institutions publiques, commerçants et indépendants. Tous les prix dans les catalogues s’entendent hors TVA, frais de port et suppléments le cas échéant.
Le fabricant est exclusivement responsable du contenu, des prix et des détails des articles et des offres présentés dans les catalogues. Sous réserve de modifications techniques et optiques du fabricant et sous réserve d’erreurs.
Le fabricant est exclusivement responsable du contenu, des prix et des détails des articles et des offres présentés dans les catalogues. Sous réserve de modifications techniques et optiques du fabricant et sous réserve d’erreurs.
Catalogue correspondant
Offre client commercial**
Suggestions de produits
-29%
Ressort de levier n° 99
9709538
17,35 €
hors Expédition
24,39 € PDSF
hors Expédition
-7%
Joint de couvercle de soupape pour moteur KUBOTA
9503333
33,25 €
hors Expédition
35,70 € PDSF
hors Expédition
-13%
Lampe LED ’rouge’ 12V AC/DC IP65 (20mA)
9503151
28,05 €
hors Expédition
32,15 € PDSF
hors Expédition
-19%
Clé à œil pour flasque de lame (lors du changement de lame)
9601510
18,60 €
hors Expédition
23,10 € PDSF
hors Expédition
-28%
Support (pos. 39)
9708458
50,15 €
hors Expédition
69,60 € PDSF
hors Expédition
-19%
Interrupteur pour MiniMix 1000/1300/1600
9601365
18,60 €
hors Expédition
23,10 € PDSF
hors Expédition
-27%
Rondelle isolante n° 4 WT340/440/540 (023.0122)
58320
5,45 €
hors Expédition
7,50 € PDSF
hors Expédition
-7%
Tête de chauffage par induction XL complète
58266
581,25 €
hors Expédition
627,15 € PDSF
hors Expédition
-16%
Tamis de filtre à huile
9503112
37,45 €
hors Expédition
44,60 € PDSF
hors Expédition
-17%
Tampons caoutchouc suspension moteur et alternateur
9501109
6,50 €
hors Expédition
7,85 € PDSF
hors Expédition
-7%
Séparateur cyclonique WS 50, FI 1’
12704
448,40 €
hors Expédition
481,95 € PDSF
hors Expédition
-6%
Anneau de fonte de manchon n° 21
9801046
231,20 €
hors Expédition
246,35 € PDSF
hors Expédition
-15%
Vanne de carburant (robinet d’essence) 8 mm B&S Vanguard
9503687
77,60 €
hors Expédition
91,65 € PDSF
hors Expédition
-16%
Fiche jumelée avec poignée ’KG004’
9403983
65,60 €
hors Expédition
77,95 € PDSF
hors Expédition
-12%
Roue de renvoi
9706116
503,75 €
hors Expédition
574,75 € PDSF
hors Expédition
No Review yet
Description: No Review yet
Written by: No Review
Rating: 5 out of 5
5 stars, based on 1
reviews
ELMAG Préfiltre avec purgeur automatique 12602
Elmag 12602
Acheter Elmag 12602
ELMAG Entwicklungs- und Handels GmbH 12602
Préfiltre avec purgeur automatique
9004853126024
12602
Elmag
ELMAG Entwicklungs- und Handels GmbH
- Préfiltre Elmag avec purgeur automatique, numéro de fabrication Elmag : 12602
- Préfiltre série G, FG20, 1980 l/min, FI 1/2’
