Treston catalogue postes de travail ESD Page 10
Offre client commercial**Produits de la page du catalogue
hors Expédition
hors Expédition
hors Expédition
hors Expédition
hors Expédition
Nos normes respectent les exigences les plus élevées en termes de certification Certificate of Qualification Q514/2017 V1.1 1/1 15.3.2017 Certificate of Qualification Cleanroom Suitability of Treston Concept and WB Workstations The cleanroom suitability of Treston Concept and WB workstations was assessed in the cleanroom of ISO 14644-1 class 7, February 2017. The requirements of ISO class 7 were met at rest and in operation. Summary of the qualification is shown in Table 1. Detailed information is presented in a technical report C514/2017. Table 1: General Information Client Contact Treston Oy, Sorakatu 1, 20730 Turku Kimmo Lehti, +358 50 395 8562, [email protected] Dates of Test February 9 – 16, 2017 Place of Test Cascade Metrology, Electrostatics Laboratory, Hakulintie 32, 08500 Lohja GSM +358 4456 88 599 Conditioning ISO Class 7, RH = (25 ± 5) %, T = (23 ± 3) °C Samples under Test Sample 1: Concept motorized ESD workstation 10349015P+TT10060-ESD with accessories, SN 5219, 01/2017 Sample 2: WB811 EL ESD motorized workstation with accessories SN 7154, 01/2017 Test Equipment Particle counter Climet Cl 500 SN 956475, Temperature and humidity meter Vaisala HM 41 SN M1850876, Sensor Vaisala HMP 113 SN M1750872 Assessment Criteria EN ISO 14644-1:2015 Cleanrooms and associated controlled environments - Part 1: Classification of air cleanliness by particle concentration Summary of Results Requirements of ISO class 7 were met at rest and in operation. The requirements of ISO class 6 were also met at rest with the large particle sizes > 0.5 µm. Note This certificate may only be reproduced in full, except with the prior written permission by issuing laboratory. The results relate only to the tested items. Date and place Lohja 15.3.2017 Author Toni Viheriäkoski, CEO, Cascade Metrology, ESD Engineer Toni Viheriäkoski Cascade metrology Oy, Hakulintie 32, 08500 Lohja [email protected] Norme de qualité Certification d'approbation antistatique ISO 9001 : 2015 Nos produits sont conformes aux spécifications de base de la norme IEC 61340-5-1. Les postes de travail motorisés TRESTON Concept et WB sont compatibles avec une utilisation en salle propre selon la norme ISO614644-1, classe 7 Certificate of Qualification Q515-1/2017 V1.1 1/1 Certificate of Qualification Q518/2017 V1.0 1/1 15.3.2017 18.3.2017 Certificate of Qualification Certificate of Qualification ESD control items – Workstations Treston Concept and WB Cleanroom Suitability of Chair Treston Ergo C20PU-ESD The cleanroom suitability of Treston Ergo C20PU-ESD chair was assessed in the cleanroom of ISO 14644-1 class 7, February 2017. The requirements of ISO class 7 were met at rest and in operation. Summary of the qualification is shown in Table 1. Detailed information is presented in a technical report C515/2017. ESD-control characteristics of Treston Concept and WB workstations were assessed in accordance with IEC 61340-5-1 and IEC 61340-2-3. Summary of the qualification is shown in Table 1. Detailed information is presented in a technical report C518/2017. Table 1: General Information Client Table 1: General Information Client Contact Treston Oy, Sorakatu 1, 20730 Turku Kimmo Lehti, +358 50 395 8562, [email protected] Dates of Test February 26th – March 1st, 2017 Place of Test Cascade Metrology, Electrostatics Laboratory, Hakulintie 32, 08500 Lohja GSM +358 4456 88 599 Contact Treston Oy, Sorakatu 1, 20730 Turku Kimmo Lehti, +358 50 395 8562, [email protected] Dates of Test March 12 - 17, 2017 ( C518/2017) Place of Test Cascade Metrology, Electrostatics Laboratory, Hakulintie 32, 08500 Lohja GSM +358 4456 88 599 Conditioning 48 hours, RH = (12 ± 3) %, T = (23 ± 2) °C Samples under Test Sample 1: Concept motorized ESD workstation 10349015P+TT10060-ESD with accessories, SN 5219, 01/2017 Sample 2: WB811 EL ESD motorized workstation with accessories SN 7154, 01/2017 Conditioning ISO Class 7, RH = (25 ± 5) %, T = (23 ± 3) °C Samples under Test Treston Ergo C20PU-ESD Chair, 20015654, 9651C, 2401978/002, 02.09.2016 Test Equipment Test Equipment Particle counter Climet Cl 500 SN 956475, Temperature and humidity meter Vaisala HM 41 SN M1850876, Sensor Vaisala HMP 113 SN M1750872 Test Method(s) IEC 61340-2-3:2016, Edition 2.0, Electrostatics – Part 2-3: Methods of test for determining resistance and resistivity of solid materials used to avoid electrostatic charge accumulation Assessment Criteria EN ISO 14644-1:2015 Cleanrooms and associated controlled environments - Part 1: Classification of air cleanliness by particle concentration Assessment Criteria IEC 61340-5-1:2016, Edition 2.0, Electrostatics – Part 5-1: Protection of electronic devices from electrostatic phenomena Summary of Results Requirements of ISO class 7 were met at rest and in operation. The requirements of ISO class 6 were also met at rest with the large particle sizes > 0.5 µm. Summary of Results This certificate may only be reproduced in full, except with the prior written permission by issuing laboratory. The results relate only to the tested items. The samples met the requirements of working surfaces according to IEC 61340-5-1. Resistance to groundable point and point to point resistances were below 1 × 109 Ω. Results and observations are presented in a technical report C518/2017. Note Note This certificate may only be reproduced in full, except with the prior written permission by issuing laboratory. The results relate only to the tested items. Date and place Author Date and place Lohja 15.3.2017 BMM2000ESD Sn /1387, HM41 Sn M1850876, Cylindrical electrode Vermason 222008, Concentric ring electrode Vermason 222002 Author Toni Viheriäkoski, CEO, Cascade Metrology, ESD Engineer Lohja 18.3.2017 Toni Viheriäkoski Cascade metrology Oy, Hakulintie 32, 08500 Lohja [email protected] Les chaises TRESTON Ergo C20PU-ESD sont compatibles avec une utilisation en salle propre selon la norme Toni Viheriäkoski, CEO, Cascade Metrology, ESD Engineer Toni Viheriäkoski Cascade metrology Oy, Hakulintie 32, 08500 Lohja [email protected] Certification ESD Les postes de travail TRESTON Concept et WB répondent aux exigences de base de la norme sur les environnement protégés des décharges électrostatiques selon la norme IEC 61340-5-1 Certification ESD Les étagères TRESTON, les bacs de picking et d'étagères ainsi que les casiers à tiroirs respectent les bases de la norme IEC61340-5-1 ISO 14644-1, classe 7 Pour obtenir une copie de nos certificats, contactez [email protected]. ! 10 La garantie pour les produits standards de fabrication TRESTON est de 5 ans, à compter de la date de livraison. Ceci exclut les plans de travail, les composants électroniques, les produits spéciaux et les pièces d'usure pour lesquels la garantie est de 2 ans. Ces garanties s'appliquent dans le cadre d'une utilisation conforme aux spécifications TRESTON et dans une utilisation normale. Treston - Le mobilier technique ESD
84 Pages | Valable jusqu’au 12/2024 | Page précédente | Page suivante
Choisissez votre langue
Probleme juridique
Le fabricant est exclusivement responsable du contenu, des prix et des détails des articles et des offres présentés dans les catalogues. Sous réserve de modifications techniques et optiques du fabricant et sous réserve d’erreurs.
Formulaire de demande de produits spéciaux
Le service d’approvisionnement ToolTeam®
Vous recherchez des produits qui figurent dans le catalogue mais ne peuvent pas être achetés directement en ligne ?Notre service d’approvisionnement se fera un plaisir de vous faire une offre individuelle et sans engagement.