Woelm Catalogue KWS Hardware for Handrails, Floor Rails, Coat Racks and Partition Walls Page 65
Offre client commercial**Produits de la page du catalogue
KWS Partition Wall Supports Standard design KWS 4241.. aluminium machined according to E5 KWS 1 silver anodised .31 KWS 2 nickel silver anodised .32 aluminium 100 - 125 mm high KWS 4242.. 125 - 150 mm high .70 coloured plastic-coated brushed .82 polished .83 unit 2 pieces Piece weight aluminium 0.200 kg stainless steel 0.400 kg KWS Partition Wall Supports KWS 4243.. stainless steel 150 - 175 mm high with L-shape saddle, height adjustable, for screwing on with fixing material Mounting Screw floor sleeve with inserted washer on the floor, insert support, turn it by means of a spanner to the desired height and tighten with round nut, secure support with clamping screw. To offset possible deviations when boring the floor plug hole every partition wall support is supplied with an additional eccentric disc, which is used instead of the washer. Deviations of up to 4 mm from the centre can be equalised. With every packaging unit mounting instructions are included. Standard design KWS 4251.. aluminium machined according to E5 KWS 1 silver anodised .31 KWS 2 nickel silver anodised .32 aluminium 100 - 125 mm high KWS 4252.. 125 - 150 mm high .70 coloured plastic-coated KWS 4253.. stainless steel brushed .82 polished .83 unit 2 pieces Piece weight aluminium 0.210 kg stainless steel 0.440 kg 150 - 175 mm high with U-shaped saddle for 19 mm wall, height adjustable,for screwing on, with fixing material Mounting Screw floor sleeve with inserted washer on the floor, insert support, turn it by means of a spanner to the desired height and tighten with round nut, secure support with clamping screw. To offset possible deviations when boring the floor plug hole every partition wall support is supplied with an additional eccentric disc, which is used instead of the washer. Deviations of up to 4 mm from the centre can be equalised. With every packaging unit mounting instructions are included. Order example Piece Part no. Finish no. ... Piece KWS 4251 .31 65 TEK_0407/06.2017
80 Pages | Valable jusqu’au 01/2021 | Page précédente | Page suivante
Choisissez votre langue
Probleme juridique
Le fabricant est exclusivement responsable du contenu, des prix et des détails des articles et des offres présentés dans les catalogues. Sous réserve de modifications techniques et optiques du fabricant et sous réserve d’erreurs.
Formulaire de demande de produits spéciaux
Le service d’approvisionnement ToolTeam®
Vous recherchez des produits qui figurent dans le catalogue mais ne peuvent pas être achetés directement en ligne ?Notre service d’approvisionnement se fera un plaisir de vous faire une offre individuelle et sans engagement.