Woelm Catalogue KWS Hardware for Handrails, Floor Rails, Coat Racks and Partition Walls Page 30
Offre client commercial**Produits de la page du catalogue
KWS Handrails Handrail Brackets KWS 4509.. with fixing material adjustable for 50 - 65 mm clearance to the wall Mounting The wall parts of the brackets are screwed on the wall with a distance spacing of 800 - 1200 mm at the wall positions planned for the handrail. Then the counter pieces are fixed on the handrail at the corresponding positions. The handrail with its brackets is pressed into the brackets fixed on the wall and firmly joined with a grub screw. Standard design aluminium machined according to E4 KWS 1 silver anodised .22 KWS 2 nickel silver anodised .23 KWS 3 gold anodised .24 KWS 5 dark bronze anodised .28 aluminium machined according to E5 .31 KWS 1 silver anodised KWS 2 nickel silver anodised .32 KWS 3 gold anodised .33 KWS 5 dark bronze anodised .37 aluminium .70 coloured plastic-coated unit Mounting instructions are enclosed with each packing unit. 5 pieces Piece weight 0.210 kg aluminium The benefit of this handrail support is the simple mounting: Deviations when boring the plug holes can be corrected by means of an enclosed mounting disk. The screw holes in the handrail can be marked very easily by marking aids and possible unevenness of the wall can be offset by a long hole in the bracket. KWS 4555.. with fixing material adjustable for 50 - 65 mm clearance to the wall Mounting The wall parts of the brackets are screwed on the wall with a distance spacing of 800 - 1200 mm at the wall positions planned for the handrail. Then the counter pieces are fixed on the handrail at the corresponding positions. The handrail with its brackets is pressed into the brackets fixed on the wall and firmly joined with a grub screw. Mounting instructions are enclosed with each packing unit. Standard design aluminium machined according to E4 KWS 1 silver anodised .22 KWS 2 nickel silver anodised .23 KWS 3 gold anodised .24 KWS 5 dark bronze anodised .28 aluminium machined according to E5 .31 KWS 1 silver anodised KWS 2 nickel silver anodised .32 KWS 3 gold anodised .33 KWS 5 dark bronze anodised .37 aluminium .70 coloured plastic-coated unit 2 pieces Piece weight 0.500 kg aluminium The benefit of this handrail bracket is the simple mounting: Deviations when boring the plug holes can be corrected by means of an enclosed mounting disk and possible unevenness of the wall can be offset by a long hole in the bracket. Order example Piece Part no. Finish no. ... Piece KWS 4509 .22 30 TEK_0407/06.2017
80 Pages | Valable jusqu’au 01/2021 | Page précédente | Page suivante
Choisissez votre langue
Probleme juridique
Le fabricant est exclusivement responsable du contenu, des prix et des détails des articles et des offres présentés dans les catalogues. Sous réserve de modifications techniques et optiques du fabricant et sous réserve d’erreurs.
Formulaire de demande de produits spéciaux
Le service d’approvisionnement ToolTeam®
Vous recherchez des produits qui figurent dans le catalogue mais ne peuvent pas être achetés directement en ligne ?Notre service d’approvisionnement se fera un plaisir de vous faire une offre individuelle et sans engagement.