Woelm Catalogue HELM Hardware for Sliding Gates Page 11
Offre client commercial**Meilleures ventes de HELM KWS by Woelm
hors Expédition
HELM Hardware for Sliding Gates Trolley Hangers HELM Bottom Guide - Pressure Rollers, Guide Rollers and Glides In order to achieve a trouble-free and smooth-running operation of the sliding leaves a bottom guide should be incorporated, if possible. For this HELM hardware offers a choice of standard parts. The decision on the kind of bottom guide depends on the constructional conditions of the location and the following factors: • the weight, the size and the material (timber/steel/aluminium) of the door or gate leaf • the constructional conditions (e. g. structural analysis), as well as the regulations with regard to safety or fire protection. HELM Pressure rollers and wedge Pressure roller (fig. 3) and wedge (fig. 4) as well as angle iron bar (fig. 2) with claw for specially good waterproofing of exterior doors or gates. fig. 3 fig. 1 angle iron bar (fig. 2) Technical information • the use as sliding door or gate door for closing off of a hall to the outside or for separating of inside rooms • the dimension of the usable clearance (height and width) • the number of the door or gate leaves wedge (fig. 4) pressure roller (fig. 3) Benefit: No water intrusion in case of upright angle iron bar. No movement in case of wind. HELM Adjustable tortoiseshell-shaped guide fig. 2 fig. 4 fig. 5 fig. 7 Adjustable tortoiseshell-shaped guides (fig. 7) with 2 wedges (fig. 4) and 2 pressure rollers (fig. 3). Guiding of 2 door leaves to the centre on continuous floor. No tyre damage when passing through. pressure roller (fig. 3) wedge (fig. 4) tortoiseshell-shaped guide (fig. 7) HELM Tortoiseshell-shaped guide with angle bar fig. 8 fig. 6 Adjustable tortoiseshell-shaped guides (fig. 8) with wedges (fig. 4), pressure rollers (fig. 3) and angle bars (fig. 2 - to be supplied by the customer). angle iron bar (fig. 2) tortoiseshell-shaped guide (fig. 7) pressure roller (fig. 3) wedge (fig. 4) More accessories from page 39 11 TEH_06/05.2016
96 Pages | Valable jusqu’au 12/2020 | Page précédente | Page suivante
Choisissez votre langue
Probleme juridique
Le fabricant est exclusivement responsable du contenu, des prix et des détails des articles et des offres présentés dans les catalogues. Sous réserve de modifications techniques et optiques du fabricant et sous réserve d’erreurs.
Formulaire de demande de produits spéciaux
Le service d’approvisionnement ToolTeam®
Vous recherchez des produits qui figurent dans le catalogue mais ne peuvent pas être achetés directement en ligne ?Notre service d’approvisionnement se fera un plaisir de vous faire une offre individuelle et sans engagement.