WEICON Main Catalogue Chemical and technical products Page 90
Offre client commercial**Meilleures ventes de Weicon
hors Expédition
hors Expédition
hors Expédition
hors Expédition
hors Expédition
hors Expédition
hors Expédition
hors Expédition
hors Expédition
hors Expédition
hors Expédition
hors Expédition
hors Expédition
hors Expédition
hors Expédition
hors Expédition
hors Expédition
hors Expédition
hors Expédition
hors Expédition
hors Expédition
hors Expédition
hors Expédition
hors Expédition
hors Expédition
hors Expédition
hors Expédition
hors Expédition
hors Expédition
hors Expédition
hors Expédition
hors Expédition
hors Expédition
hors Expédition
hors Expédition
hors Expédition
hors Expédition
hors Expédition
hors Expédition
hors Expédition
Gasket Maker Permanently elastic special sealant WEICON Gasket Maker is a strong and permanently elastic special sealant that cures with air humidity and practically without shrinkage. Gasket Maker has a very good adhesion to steel, aluminium, glass, ceramic, and many other materials. Gasket Maker has an excellent temperature, oil and grease resistance, is pressure- and ageing-resistant, UV-stable and permanently elastic. Adhesives / Sealants The special sealant can be used on engines and water pumps, gears and axles, oil sumps and in many other applications. ► 310 ml 10049930 ► 310 ml 10049931 red black Technical data WEICON Gasket Maker in non-cured condition black red Technical Sprays Base: one-component acetate Density (g/cm³): 1.28 1.06 Viscosiy: pasty pasty Stability/Run-off (ASTM D 2202) mm: 1 >1 by humidity Cure type: Curing condition: Skin-over time (minutes):*³ Technical Liquids Cure speed:*³ Volume change (DIN 52451) %:*³ +5°C to +35°C (+41 to +95°F) and 30% to 95% rel. humidity 12 7 2-3 mm in the first 24 hours -1 % -3 % Gap filling up to max. mm: 5 Gap width up to max. mm: 25 Shelf life in months: 12 (room temperature) Assembly Pastes WEICON Gasket Maker in cured condition Shore hardness A (DIN 53505 / ASTM D 2240): Elongation at break ISO 37, S3A [%] Tensile strength ISO 37, S3A [N/mm²] Tension strength value at 100 % (ISO 37, S3A) Lubricants Movement capacity max. %: Temperature resistance: Paintable: 35 30 500 2.0 N/mm² (290 psi) 0.9 N/mm² 0.7 N/mm² 15 15 (130 psi) (100 psi) -60°C to +280°C (-76°F to +536°F) briefly up to (approx. 2 h) +300°C (+572°F) cannot be painted Building material category (DIN 4102): B2 WEICON TOOLS® *³ Normal climate +23°C (+73°F) and 50% relative humidity in accordance with DIN 50014. Other VIDEO 90 Catalogue WEICON
244 Pages | Valable jusqu’au 12/2025 | Page précédente | Page suivante
Choisissez votre langue
Probleme juridique
Le fabricant est exclusivement responsable du contenu, des prix et des détails des articles et des offres présentés dans les catalogues. Sous réserve de modifications techniques et optiques du fabricant et sous réserve d’erreurs.
Formulaire de demande de produits spéciaux
Le service d’approvisionnement ToolTeam®
Vous recherchez des produits qui figurent dans le catalogue mais ne peuvent pas être achetés directement en ligne ?Notre service d’approvisionnement se fera un plaisir de vous faire une offre individuelle et sans engagement.