WEICON Main Catalogue Chemical and technical products Page 75
Offre client commercial**Meilleures ventes de Weicon
hors Expédition
hors Expédition
hors Expédition
hors Expédition
hors Expédition
hors Expédition
hors Expédition
hors Expédition
hors Expédition
hors Expédition
hors Expédition
hors Expédition
hors Expédition
hors Expédition
hors Expédition
hors Expédition
hors Expédition
hors Expédition
hors Expédition
hors Expédition
hors Expédition
hors Expédition
hors Expédition
hors Expédition
hors Expédition
hors Expédition
hors Expédition
hors Expédition
hors Expédition
hors Expédition
hors Expédition
hors Expédition
hors Expédition
hors Expédition
hors Expédition
hors Expédition
hors Expédition
hors Expédition
hors Expédition
hors Expédition
WEICONLOCK® Adhesives / Sealants Threadlocking AN 302-90 Technical Sprays Due to its low viscosity and high capillary action, it penetrates the thread interstices, without the connection having to be loosened beforehand. Ideal for pre-assembled screw connections. Hygiene-Institut des Ruhrgebiets Locking of threads and stud bolts | high-temperature-resistant | DVGW- and drinking water approval Threadlocking | for subsequent locking and sealing of hairline cracks ► ► higher viscosity high strength hard to disassemble ► ► 20 ml 10019901 ► 50 ml 10017889 ► ► ► ► 200 ml 10019982 ► Technical Liquids AN 302-90 www.klebstoffe.com Nach IVK-Empfehlung geprüft durch: extremely low viscosity high capillary action high strength hard to disassemble ► 20 ml 10019905 ► 50 ml 10017891 ► 200 ml 10019993 Assembly Pastes AN 302-72 Technical Data For threaded joints up to Viscosity at +25°C (+77°F) Brookfield Gap filling capacity max. Breakaway strength (Thread) Temperature resistance AN 301-43 blue M 36 2,000 - 8,000 mPa,s 0.25 mm 18 - 22 Nm 9 - 11 Nm 10 - 13 N/mm² (1,450 - 1,885 psi) 5 - 15 min. 1-3h -60 to +150°C (-76 to +302°F) AN 301-70 green M 25 500 - 900 mPa,s 0.15 mm 25 - 35 Nm 40 - 50 Nm 14 - 20 N/mm² (2,030 - 2,900 psi) 5 - 15 min. 5 - 10 h -60 to +150°C (-76 to +302°F) AN 302-21 violet M 12 125 mPa,s 0.10 mm 7 - 10 Nm 3 - 6 Nm 4 - 7 N/mm² (580 - 1,115 psi) 10 - 20 min. 3-6h -60 to +150°C (-76 to +302°F) AN 302-22 purple M 36 1,000 mPa,s 0.20 mm 4 - 8 Nm 2 - 4 Nm 3 - 5 N/mm² (435 - 725 psi) 10 - 20 min. 3-6h -60 to +150°C (-76 to +302°F) 10 - 20 min. 3-6h -60 to +150°C (-76 to +302°F) AN 302-40 transparent M 20 R 3/4“ 600 mPa,s 0.15 mm 12 - 16 Nm 18 - 24 Nm 8 - 12 N/mm² (1,160 - 1,740 psi) AN 302-41 blue M 12 125 mPa,s 0.10 mm 10 - 15 Nm 12 - 16 Nm 8 - 12 N/mm² (1,160 - 1,740 psi) 10 - 20 min. approx. 3 h -60 to +150°C (-76 to +302°F) AN 302-42 blue M 36 1,000 mPa,s 0.20 mm 14 - 18 Nm 5 - 8 Nm 8 - 12 N/mm² (1,160 - 1,740 psi) 10 - 20 min. 3-6h -60 to +150°C (-76 to +302°F) AN 302-43 blue M 36 2,000 - 7,000 mPa,s 0.25 mm 17 - 22 Nm 8 - 12 Nm 9 - 13 N/mm² (1,305 - 1,885 psi) 10 - 20 min. 1-3h -60 to +200°C (-76 to +392°F) AN 302-44 blue M 36 3,000 - 8,000 mPa,s 0.25 mm 17 - 22 Nm 8 - 12 Nm 8 - 12 Nm* 5 - 8 Nm* AN 302-50 transparent M 20 R 3/4“ 500 mPa,s 0.15 mm 30 - 35 Nm 55 - 70 Nm AN 302-60 green M 20 R 3/4“ 700 - 1,000 mPa,s 0.15 mm AN 302-62 red M 36 1,500 - 6,500 mPa,s 0.25 mm 30 - 35 Nm 55 - 70 Nm 15 - 20 Nm* 30 - 35 Nm* 20 - 25 Nm 40 - 55 Nm 9 - 13 N/mm² (1,305 - 1,895 psi) 25 - 35 N/mm² (3,625 - 5,075 psi) 10 - 20 min. 1-3h 20 - 40 min.* 4 - 8 h* 2 - 5 min. 2-4h -60 to +200°C (-76 to +392°F) -60 to +175°C (-76 to +347°F) 2 - 5 min. 2-4h 5 - 10 min.* 6 - 12 h* 10 - 15 N/mm² (1,450 - 2,175 psi) 10 - 20 min. 3-6h -60 to +150°C (-76 to +302°F) 10 - 20 min. 3 -6 h -60 to +200°C (-76 to +392°F) 25 - 35 N/mm² (3,625 - 5,075 psi) -60 to +180°C (-76 to +356°F) AN 302-70 green M 20 R 3/4“ 500 mPa,s 0.15 mm 28 - 35 Nm 50 - 65 Nm 15 - 20 N/mm² (2,175 - 2,900 psi) AN 302-71 red M 20 R 3/4“ 500 mPa,s 0.15 mm 28 - 35 Nm 50 - 65 Nm 15 - 20 N/mm² (2,175 - 2,900 psi) 10 - 20 min. 3-6h -60 to +150°C (-76 to +302°F) AN 302-72 red M 56 R 2“ 6,000 - 15,000 mPa,s 0.30 mm 20 - 30 Nm 40 - 75 Nm 10 - 15 N/mm² (1,450 - 2,175 psi) 20 - 40 min. 5 - 10 h -60 to +230°C (-76 to +446°F) AN 302-90 green M 5 capillary 10 -20 mPa,s 0.07 mm 15 - 25 Nm 30 - 40 Nm 8 - 12 N/mm² (1,160 - 1,740 psi) 5 - 20 min. approx. 3 h -60 to +150°C (-76 to +302°F) Other Prevailing strength Shear strength Handling strength at Final strength at (Thread) N/mm² (DIN 54452) room temperature room temperature Lubricants Colour WEICON TOOLS® Type-No. * Strength measured on V4A stainless steel screws Catalogue WEICON 75
244 Pages | Valable jusqu’au 12/2025 | Page précédente | Page suivante
Choisissez votre langue
Probleme juridique
Le fabricant est exclusivement responsable du contenu, des prix et des détails des articles et des offres présentés dans les catalogues. Sous réserve de modifications techniques et optiques du fabricant et sous réserve d’erreurs.
Formulaire de demande de produits spéciaux
Le service d’approvisionnement ToolTeam®
Vous recherchez des produits qui figurent dans le catalogue mais ne peuvent pas être achetés directement en ligne ?Notre service d’approvisionnement se fera un plaisir de vous faire une offre individuelle et sans engagement.