WEICON Main Catalogue Chemical and technical products Page 56
Offre client commercial**Meilleures ventes de Weicon
hors Expédition
hors Expédition
hors Expédition
hors Expédition
hors Expédition
hors Expédition
hors Expédition
hors Expédition
hors Expédition
hors Expédition
hors Expédition
hors Expédition
hors Expédition
hors Expédition
hors Expédition
hors Expédition
hors Expédition
hors Expédition
hors Expédition
hors Expédition
hors Expédition
hors Expédition
hors Expédition
hors Expédition
hors Expédition
hors Expédition
hors Expédition
hors Expédition
hors Expédition
hors Expédition
hors Expédition
hors Expédition
hors Expédition
hors Expédition
hors Expédition
hors Expédition
hors Expédition
hors Expédition
hors Expédition
hors Expédition
Adhesives / Sealants Technical Data: WEICON Urethanes in non-cured condition Urethane 45 Urethane 60 Urethane 80 Urethane 85 Urethane 85 SF Urethane 90 SF Polyurea Polyurea Polyurea Polyurea Polyurea Polyurethane 500 g 500 g 500 g 500 g, 540 g 540 g 550 g 100 : 180 100 : 150 100 : 80 10 : 100 10:100 100 : 23 Base: Complete packaging sizes: Mixing ratio (weight %): Resin/Hardener Technical Sprays Pot life at +20°C (68°F) min.: Density of the mixture (g/cm³): Viscosity at +25°C (77°F) Resin/Hardener (mPa.s): Technical Liquids Cure times at +20°C (+68°F) Mixture viscosity at +25°C (77°F) (mPa.s): High mechanical load capacity / detachable after Final strength (100%) after: 25 25 25 20 3 8 1.04 1.04 1.00 1.10 1.10 1.60 5,000 / 500 5,000 / 520 5,000 / 190 500 / 14,000 600 / 13,000 5,500 / 200 1,500 1,500 2,000 17,000 approx, 17,000 3,000 12 - 20 h 12 - 20 h 12 - 20 h 6-8h 1h 2-3h approx. 48*1 h approx. 48*1 h approx. 48*1 h approx. 24*1 h 3h approx. 24*1 h WEICON Urethanes in cured condition Tensile strength according to DIN EN ISO 527-2 MPa (psi): 3.5 (600) 5.0 (800) 8.0 (1.200) 7.8 (1.100) 8.4 (1.200) - Elongation at break according to DIN EN ISO 527-2 (%): 1,450 1,250 600 470 590 1 7,5 10 15 31 31 - Resistance to further tearing (DIN ISO 34-1) (kN/m): Assembly Pastes Shore hardness (DIN ISO 7619): Colour after curing: Temperature resistance: A 45 A 60 A 80 A 85 A 85 D 90 light-beige light-beige light-beige black black brown -60°C to +90°C (-76 to +194°F) -60°C to +90°C (-76 to +194°F) -60°C to +90°C (-76 to +194°F) wet: -60°C to +80°C (-76 to +176°F) dry: -60°C to +100°C (-76 to +212°F) wet: -60 to +80 °C (-76 to +176 °F) dry: -60 to +100 °C (-76 to +212 °F) -60°C to +90°C (-76 to +194°F) Lubricants *1 or after 24 hours at room temperature + 4 hours +70°C WEICON TOOLS® Pre-treatment of the surface and accessories Primer M 100 For non-absorbent materials like aluminium, steel, stainless steel, brass, zinc, tinplate, plastics like PA 6.6, GRP, PUR, lacquered surfaces, enamel, ceramic and coated glass. Primer S 300 For porous and absorbent materials like wood, concrete, stone, etc. 25 ml 10060610 Other ► ► 25 ml 10060606 56 ► 250 ml 10023566 Catalogue WEICON 250 ml 10023568 Primer G Special bonding agent for urethanes for the pre-treatment of rubber and metal surfaces. ► Urethane Colour Paste Special colour paste on the basis of finely dispersed pigments. 250 ml 10024676 ► ► 50 g 10057199 Primer Applicator For application of WEICON Primer. 10032350
244 Pages | Valable jusqu’au 12/2025 | Page précédente | Page suivante
Choisissez votre langue
Probleme juridique
Le fabricant est exclusivement responsable du contenu, des prix et des détails des articles et des offres présentés dans les catalogues. Sous réserve de modifications techniques et optiques du fabricant et sous réserve d’erreurs.
Formulaire de demande de produits spéciaux
Le service d’approvisionnement ToolTeam®
Vous recherchez des produits qui figurent dans le catalogue mais ne peuvent pas être achetés directement en ligne ?Notre service d’approvisionnement se fera un plaisir de vous faire une offre individuelle et sans engagement.