WEICON Main Catalogue Chemical and technical products Page 193
Offre client commercial**Meilleures ventes de Weicon
hors Expédition
hors Expédition
hors Expédition
hors Expédition
hors Expédition
hors Expédition
hors Expédition
hors Expédition
hors Expédition
hors Expédition
hors Expédition
hors Expédition
hors Expédition
hors Expédition
hors Expédition
hors Expédition
hors Expédition
hors Expédition
hors Expédition
hors Expédition
hors Expédition
hors Expédition
hors Expédition
hors Expédition
hors Expédition
hors Expédition
hors Expédition
hors Expédition
hors Expédition
hors Expédition
hors Expédition
hors Expédition
hors Expédition
hors Expédition
hors Expédition
hors Expédition
hors Expédition
hors Expédition
hors Expédition
hors Expédition
Anti-Seize Anti-Seize Anti-Seize High-Tech Copper Paste Anti-Seize Nickel Anti-Seize Ceramic Paste ++ + + -++ ++ --++ ++ + + -++ ++ --++ ++ + + -++ ++ --++ ++ + + -++ ++ --++ ++ + + -++ ++ --++ ++ ++ -++ + ++ ++ ++ ++ + ++ ++ ++ -++ + ++ ++ ++ ++ + ++ ++ ++ -++ + ++ ++ ++ ++ + ++ ++ ++ -++ + ++ ++ ++ ++ + ++ ++ ++ -++ + ++ ++ ++ ++ + ++ ACM - Acrylate rubber CR - Chloroprene rubber CSM - Chlorosulfonated PE rubber EPDM - Ethylene propylene diene rubber FKM - Fluorocaoutchoc NBR - Nitrile butadiene rubber NR - Natural rubber SBR - Styrene butadiene rubber SQM/VMQ - Silicone rubber Technical Sprays WEICON Anti-Seize products and their behaviour towards sealing materials (elastomers) Adhesives / Sealants Assembly Pastes PA - Polyamide PC - Polycarbonate PE-UHMW - Polyethylene with ultra high molar weight PE-LD - Polyethylene with low density PET - Polyethyleneterephthalate POM - Polyoxymethylene PP - Polypropylene PTFE - Polytetrafluor ethylene PUR - Polyurethane PVC - Polyvinylchloride ++ resistant + resistant to a limited extent Assembly Pastes ABS - ABS copolymeride Technical Liquids WEICON Anti-Seize products and their behaviour towards polymer materials -- not resistant Colour OFW device coefficient of friction Coefficient of friction total Anti-Seize Anti-Seize High-Tech Anti-Seize Nickel Copper Paste Anti-Seize Ceramic Paste synthetic oil mixture medicinal oil synthetic oil mineral oil Polyalphaolefin anthracite white anthracite copper white 0.13 0.10 to 0.13 0.16 --- --- 0.11 µ 0.11 µ 0.12 µ 0.13 μ 0.15 μ Coefficient of friction thread 0.13 µ 0.12 µ 0.14 µ 0.14 μ 0.17 μ Coefficient of friction on upside down 0.10 µ 0.10 µ 0.11 µ 0.12 μ 0.14 μ VKA-TEST (DIN 51350) goods load 4,200 N 3,600 N --- 3,000 N 7,000 N VKA-TEST (DIN 51350) welding load 4,400 N 3,800 N 2,000 N 3,200 N 7,500 N 0,6 mm VKA-TEST (DIN 51350) Spherical cap value (1 Min/1000N) 0,5 mm 0,7 mm 0,6 mm --- Worked penetration (DIN ISO 2137) 310 to 340 1/10 mm 310 to 340 1/10 mm 310 to 340 310 to 340 1/10 mm --- < 0.1% < 0.1% < 0.1% < 0.1% 6% Sulphur content (DIN 51400) Water resistance (DIN 51807) Temperature resistance Pressure load Density at +20°C (+68°F) (DIN 51757) 0 - 90 0 - 91 0 - 91 0 - 91 1-90 -180 to +1,200°C (-292 to +2,192°F) -40 to +1,400°C (-40 to +2,552°F) -30 to +1,450°C (-22 to +2,642°F) -20 to 1,100°C (-4 to +2,012°F) -40 to +1,400 °C (-40 to +2,552 °F) 230 N/mm2 (33.400 psi) 230 N/mm2 (33.400 psi) 230 N/mm2 (33.400 psi) --- --- 1.42 g/cm 1.30 g/cm3 1.1 g/cm³ 1.2 g/ml 1.16 g/cm Salt spray test 3 3 > 170 h > 170 h > 170 h --- > 500 h Dielectric strength 0.47 kV/mm 0.40 kV/mm --- --- --- Specific resistance 1.2 x 1015 Ω·cm 1.0 x 1015 Ω·cm --- --- --- 1.325 J/(g·K) 1.574 J/(g·K) 1.493 J/(g·K) 1.713 J/(g·K) --- 0.546 W/(m·K) 0.675 W/(m·K) 0.582 W/(m·K) 0.392 W/(m·K) --- 1.3 kV/mm 6.3 kV/mm 1.1 kV/mm 1.7 kV/mm --- Specific heat capacity Thermal conductivity (ISO 22007-4) Dielectric strength (DIN EN 60243-1) +20°C (+68°F) Catalogue WEICON WEICON TOOLS® Basic oil Other Technical Data Lubricants The specified resistance levels are based on laboratory tests and literature notices. A guarantee cannot be provided due to the large number of raw materials used on the one hand and the complex chemical and morphological structure of the polymers on the other. In critical application cases, we recommend that you carry out tests and/or consult with our application technology department. 193
244 Pages | Valable jusqu’au 12/2025 | Page précédente | Page suivante
Choisissez votre langue
Probleme juridique
Le fabricant est exclusivement responsable du contenu, des prix et des détails des articles et des offres présentés dans les catalogues. Sous réserve de modifications techniques et optiques du fabricant et sous réserve d’erreurs.
Formulaire de demande de produits spéciaux
Le service d’approvisionnement ToolTeam®
Vous recherchez des produits qui figurent dans le catalogue mais ne peuvent pas être achetés directement en ligne ?Notre service d’approvisionnement se fera un plaisir de vous faire une offre individuelle et sans engagement.